GRAPHS FOR HYDRAULIC DESIGN OF SANITARY SEWERS - DISCUSSION

1992-07-01
ULUATAM, SS

Suggestions

Landfill settlement with decomposition and gas generation
Durmusoglu, E; Corapcioglu, MY; Tuncay, Kağan (American Society of Civil Engineers (ASCE), 2005-09-01)
A one-dimensional multiphase numerical model is developed to simulate the vertical settlement involving liquid and gas flows in a deformable.(settling) municipal solid waste (MSW) landfill. MSW is represented by a chemical composition, and a global stoichiometric reaction is used to estimate the maximum yield of gas generation. Following the general assumption accepted in the literature, the gas generated by waste decomposition is assumed to comprise of in I ethane (CH4)and carbon dioxide (CO2). The gas gen...
Modeling the water quality in Ulubat Lake
Yenilmez, Firdes; Aksoy, Ayşegül; Department of Environmental Engineering (2007)
Lakes can be used for recreational purposes, agricultural irrigation, domestic water supply or industrial use. However, these functions of the lakes can be impaired due to excess nutrient loadings from industrial facilities, agricultural activities, and discharge of wastewaters from sewage systems. Uluabat Lake is one of the important lakes in Turkey faced with water quality problems due to excess nutrient loading from point and non-point sources. In this study, Water Quality Analysis Simulation Program (WA...
Solidification/stabilization of hazardous wastes containing metals and organic contaminants
Yilmaz, Olcay; Ünlü, Kahraman; Çokça, Erdal (American Society of Civil Engineers (ASCE), 2003-04-01)
The potential of solidification/stabilization (S/S) technology for the safe disposal of hazardous wastes has wide spread recognition. The purpose of this study was to investigate the effectiveness of portland cement-based S/S technology for the safe disposal of hazardous wastes containing toxic metals and organic contaminants. As hazardous wastes, metal enriched mining residue, adsorbable organic halogens (AOX) containing pulp and paper sludge, and polychlorinated biphenyl (PCB) oil-contaminated soil were u...
Comparison of iscst3 and aermod air dispersion models: case study of cayirhan thermal power plant
Dölek, Emre; Atımtay, Aysel; Department of Environmental Engineering (2007)
In this study, emission inventory was prepared and pollutant dispersion studies were carried out for the area around Çayırhan Thermal Power Plant to determine the effects of the plant on the environment. Stack gas measurement results were used for the emissions from the power plant and emission factors were used for calculating the emissions from residential sources and coal stockpiles in the study region. Ground level concentrations of SO2, NOx and PM10 were estimated by using EPA approved dispersion model...
Anaerobic Digestability and Biogas Production Capacity of Pistachio Processing Wastewater in UASB Reactors
Gur, E.; Demirer, Göksel Niyazi (American Society of Civil Engineers (ASCE), 2019-08-01)
High volumes of wastewater with considerable levels of organic and phenolic compounds and solid material are produced during pistachio processing. There is not a commonly adopted treatment technology for the wastes produced during pistachio processing. The objective of this study is to evaluate the anaerobic digestability and biogas production capacity of pistachio processing wastewater in upflow anaerobic sludge blanket (UASB) reactors for the first time in the literature. The results indicated that pistac...
Citation Formats
S. ULUATAM, “GRAPHS FOR HYDRAULIC DESIGN OF SANITARY SEWERS - DISCUSSION,” JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE, pp. 635–636, 1992, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64314.