A new approach to optimized design of induction motors.

Date

1980

Author

Aykanat, Cevdet

Metadata

Show full item record

Item Usage Stats

70
views

0
downloads

URI

https://hdl.handle.net/11511/6524

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A new approach to the design optimization of switching reluctance motors Yağan, Ömer Faruk; Ertan, Bülent; Department of Electrical and Electronics Engineering (1990)
A new approach to thin film evaporation modeling Akkuş, Yigit; Dursunkaya, Zafer (2016-10-01) Heat pipes which use phase change heat transfer mechanism and can carry large amounts of heat, are preferred in the cooling of high heat dissipating electronic components due to the fact that they are self-operating devices with ease of manufacturing for different geometries and ability of performance in micro-gravity applications. Heat pipes having rectangular micro channels as wick structure are used in many studies because of the relative ease of developing analytical and numerical solutions to problems ...
A new approach to use of the multipole expansion method in eletromagnetic scattering problems. Hızal, Altunkan; Marinçiç, A.; Department of Electrical and Electronics Engineering (1970)
A New Approach to Optimize Ultimate Geometry of Open Pit Mines with Variable Overall Slope Angles Altuntov, Firdevs Kübra; Erkayaoğlu, Mustafa (2021-01-01) © 2021, International Association for Mathematical Geosciences.The optimization method for determining open pit limit is important, as it is crucial to achieve the most profitable outcome from the limited amount of reserves available. However, importance must be also given to geotechnical aspects to ensure that safety requirements are met. Thus, overall slope angle (OSAs) must be incorporated in the optimization process. In the conventional methods, there were problems in incorporating various OSAs, or they...
A new technique for shortening the EMI filter development stage Colak, B; Ertan, Hulusi Bülent (2003-05-16) The authors have developed a unity power factor sinusoidal current input induction cooker having an input side filter for conducted EMI noise. This paper proposes that the conducted EMI for the type of power electronics equipment considered here can be easily identified by making EMI current measurements on the system by eliminating the earth wire. A filter design based on this assumption is made and its results are compared with a filter designed using conventional noise separation technique. It is found t...

Citation Formats

C. Aykanat, “A new approach to optimized design of induction motors.,” Middle East Technical University, 1980.