A COMPATIBILITY STUDY OF WASTE POLY (ETHYLENE-TEREPHTHALATE) WITH POLY (VINYLCHLORIDE)

Date

1993-12-10

Author

AKOVALI, G
ASLAN, S

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

50
views

0
downloads

Mixtures of PET and PVC were prepared in three different compositions by a solution blending technique. A plasma surface modification method was applied to PET powder surfaces in order to enhance the miscibility of both components because of their mutual insolubility. The intrinsic viscosities of blends were measured in a phenol/tetrachloroethane-mixed solvent system. The degree of compatibility of blends was characterized by the use of the parameter DELTAb, as derived by Krigbaum and Wall. (C) 1993 John Wiley & Sons, Inc.

Subject Keywords

Materials Chemistry, General Chemistry, Surfaces, Coatings and Films, Polymers and Plastics

URI

https://hdl.handle.net/11511/65271

Journal

JOURNAL OF APPLIED POLYMER SCIENCE

DOI

https://doi.org/10.1002/app.1993.070501010

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Preparation and characterization of poly(ethylene terephthalate) powder-filled high-density polyethylene in the presence of silane coupling agents Demir, T; Tincer, T (Wiley, 2001-01-31) Micron-size crystalline particles of Poly(ethylene terephthalate) (PET), obtained from PET bottles by crystallization and grinding, were used as a filler in high-density polyethylene (HDPE). The composite of PET particle-filled HDPE was prepared by melt mixing at 190 degreesC, which was well below the melting temperature of PET. Silane coupling agents (SCAs) were used to enhance the interaction between PET and HDPE in the composite. A chain extender (CE) and maleic anhydride (MA) were also used to provide f...
Effect of composite preparation techniques on electrical and mechanical properties and morphology of nylon 6 based conductive polymer composites Koysuren, Ozcan; Yesil, Sertan; Bayram, Göknur (Wiley, 2006-11-05) Nylon 6/carbon black conductive composites were prepared using two different methods, masterbatch dilution and melt mixing. Their effect on the size and distribution of carbon black agglomerates in the matrix was studied in terms of electrical and mechanical properties and morphology. The electrical resistivity of composites prepared by both methods decreased with increasing filler composition. The electrical resistivity of the diluted masterbatch composites and the melt mixed composites was reduced from th...
Compatibility study of waste poly(ethylene terephthalate) with poly(vinyl chloride). II Akovali, G; Karababa, Eminegül (Wiley, 1998-05-02) In this study, exploration of possibilities for use of recycled poly(ethylene terephthalate) (PET) in powder form as a filler in the PVC matrix was made. Powdered PET surfaces were modified by plasma to enhance the degree of interaction and, hence, the compatibilities. For modification, a series of different chlorine-containing monomers at two plasma operational conditions selected were used, in addition to the direct use of an oligomer of vinyl chloride. A series of mechanical, thermal, and surface energy ...
Effects of microcompounding process parameters on the properties of ABS/polyamide-6 blends based nanocomposites Oezkoc, Gueralp; Bayram, Göknur; Quaedflieg, Martin (Wiley, 2008-03-05) Melt intercalation method was applied to produce acrylonitrile-butadiene-styrene/polyamide-6 (ABS/ PA6) blends based organoclay nanocomposites using a conical twin-screw microcompounder. The blend was compatibilized using a maleated olefinic copolymer. The effects of microcompounding conditions such as screw speed, screw rotation-mode (co- or counter-), and material parameters such as blend composition and clay loading level on the morphology of the blends, dispersibility of nanoparticles, and mechanical pr...
PREPARATION AND CHARACTERIZATION OF PERLITE-FILLED HIGH-DENSITY POLYETHYLENES .1. MECHANICAL-PROPERTIES AKINOKTEM, G; TINCER, T (Wiley, 1994-11-21) Four different types of high-density polyethylenes (HDPE) were blended with perlite at different concentrations. Silane coupling agent gamma-aminopropyltriethoxy silane (gamma-APS, A-1100) was used to enhance the adhesion between perlite and HDPEs. Ultimate tensile strength and elastic modulus increased as the perlite content increased, while ultimate elongations decreased with the increasing amount of perlite. Exceptional variations in the measured properties are explained in terms of the differences in po...

Citation Formats

G. AKOVALI and S. ASLAN, “A COMPATIBILITY STUDY OF WASTE POLY (ETHYLENE-TEREPHTHALATE) WITH POLY (VINYLCHLORIDE),” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 1747–1752, 1993, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65271.