Experimental studies on the effect of electrode configuration in electrofiltration

2002-01-01
Genc, A
Tosun, I
Results from the electrofiltration of anatase (TiO2) particles in a water suspension and using three different electrode configurations are presented. The three electrode configurations studied were spot, foil, and mesh. For the first two configurations, the electric field was perpendicular to the direction of flow while for the mesh configuration it was opposite to the direction of flow. The percent gain volume filtrate and power consumption were measured for each electrode configuration. For a given percent gain volume filtrate, it was observed that the foil electrode configuration consumes the least power.
SEPARATION SCIENCE AND TECHNOLOGY

Suggestions

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP OVER RECTANGULAR PROFILE FINS PLACED IN A SQUARE CHANNEL
Aylı, Ece; Kıyıcı, Fırat; Bayer, Özgür; ARADAĞ ÇELEBİOĞLU, SELİN (2014-06-19)
In this study, with the help of a fan, fully developed turbulent flow conditions are experimentally obtained to investigate the heat transfer and pressure drop characteristics of rectangular fins. Fins with different geometries are placed to the bottom surface of a square shaped channel. Finned test pieces are heated by constant heat flux and other parts are kept as well insulated. The effect of fin height to the heat transfer coefficient is investigated by performing experiments. Temperature distributions,...
Experimental investigation of particle filtration in compression resin transfer molding of advanced composites
Aydil Dalkıran, Tuğçe; Erdal Erdoğmuş, Merve; Department of Mechanical Engineering (2014)
With the inclusion of particle fillers in advanced continuous fiber reinforced composites, issues such as impregnation with increased viscosity of the injected resin leading to high process pressures and possible nonhomogeneous/directional composite properties due to filtering of filler particles necessitate the study of the relations between processing parameters and the resulting particle distributions. In this study, the particle-resin interaction during compression resin transfer molding (CRTM) and resi...
Filtration testing of a ceramic capillary filter produced from a high-silica glaze
San, O; Hoşten, Çetin (2002-07-01)
A laboratory procedure for the production of a ceramic capillary filter from a high-silica glaze was described and its filtration response was tested in dead-end and periodic vacuum filtration modes with suspensions containing micron and sub-micron clay particles obtained from a ceramic factory wastewater stream. The same glaze raw material ground to two different levels of fineness was used for the production of the porous ceramic substrate and its surface coating. The coating particulate sol was deposited...
Spectroscopic measurements of electron temperature and electron density in electron beam plasma generator based on collisional radiative model
Goktas, H.; Demir, A.; Kacar, E.; Hegazy, H.; Turan, Raşit; Oke, G.; Seyhan, A. (Informa UK Limited, 2007-01-01)
The current work describes a spectroscopic method for determining the electron temperature and electron density in an electron beam generator using argon spectral lines based on a collisional radiative model. Neutral and first-ionized Ar lines emitted from the electron beam generator are studied experimentally. A collisional radiative code was developed to simulate the Ar (I) and Ar (II) spectral emission and to compare the results with the experimental data for electron density and temperature determinatio...
SIMULATION CALCULATIONS FOR GOLD CLUSTERS ON THE GAAS(110) SURFACE
Erkoç, Şakir; HALICIOGLU, T; TILLER, WA (1992-08-15)
Energy- and structure-related properties of small gold clusters deposited on the GaAs(110) surface were investigated in this work using a molecular dynamics procedure. A recently developed potential energy function based on two- and three-body interactions was employed in calculating energies and forces. These calculations produced some consistent results with experiments. The three-body interactions involving As atoms in particular, were found to play an important role in determining favorable binding site...
Citation Formats
A. Genc and I. Tosun, “Experimental studies on the effect of electrode configuration in electrofiltration,” SEPARATION SCIENCE AND TECHNOLOGY, pp. 3053–3064, 2002, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65372.