Finite element analysis of sheet pile walls

Download

003673.pdf

Date

1988

Author

Horoz, Atilla

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://hdl.handle.net/11511/6593

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Finite element analysis of shearing processes Isbir, S.; Darendeliler, Haluk; Gökler, Mustafa İlhan (null; 2006-12-01) Shearing of sheet metal is extensively used in manufacturing industry. It is a highly non-linear process and involves complex mechanisms such as crack initiation and propagation, and deliberate fracture of the material for obtaining the desired geometry. Finite element method can be used for the design of shearing process. However, most of the general purpose commercial finite element analysis programs do not provide ready-to-use facilities to simulate shearing. In this paper, finite element simulation of s...
Finite Element Analysis of Springback in Bending of Aluminium Sheets ESAT, VOLKAN; Darendeliler, Haluk; Gökler, Mustafa İlhan (2001-02-15)
Finite element analysis of springback in bending of aluminium sheets Esat, V; Darendeliler, Haluk; Gokler, MI (2002-04-01) Bending is one of the processes frequently applied during manufacture of aluminium components. The bending operation involves springback, which is defined as elastic recovery of the part during unloading. In manufacturing industry, it is still a practical problem to predict the final geometry of the part after springback and to design appropriate tooling in order to compensate for springback. In this paper, commercially available finite-element analysis (FEA) software is used to analyse bending and springba...
Finite element analysis of bending operation of aluminum profiles Penekli, Ufuk; Darendeliler, Haluk; Department of Mechanical Engineering (2008) Bending process is an important forming process in most industrial fields. Springback and cross-section distortion are commonly faced problems in bending process. Springback behavior of closed and open section beams changes with different parameters such as cross-section type, cross-section dimensions, bend radius and bend angle. For closed sections like tube, the dominating problem is cross-section distortion. The thickness of the tube at intrados (inner surface of tube being in contact with die) increases...
Finite element analysis of cellular structures subjected to wave loads Bakır, Bahadır Sadık; Greimann, LF (2001-08-31) The study covers part of a project aiming at the investigation of cell failures and assessment of service life of a cellular cofferdam breakwater which was built as a permanent structure at Calumet Harbor in Lake Michigan near Chicago, Illinois. The structure was analyzed for a series of direction-dependent local wave load patterns using two-dimensional vertical slice and three dimensional finite element models in parallel to evaluate the performances on a comparative basis. A system of strain gauges design...

Citation Formats

A. Horoz, “Finite element analysis of sheet pile walls,” Middle East Technical University, 1988.