Use of geochemical properties of crude oils for reservoir characterization

Download
116296.pdf
2001
Yükseler, Banu
Show full item record
58
views
0
downloads
https://hdl.handle.net/11511/6626
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Use of split-disk tests for the process parameters of filament wound epoxy composite tubes
Kaynak, Cevdet; PARNAS, LEVENT; ŞENEL, FİKRET (2005-08-01)
The aim of this study was to investigate processing parameters of continuous fiber reinforced epoxy composite tubes produced by the filament winding technique. For this purpose, split-disk tests (according to ASTM D-2290 standard) were performed for the specimens produced with two different epoxy resin systems, five different fiber materials and five different winding angles. By determining the hoop tensile strength and modulus of these specimens, the effects of three filament-winding processing parameters;...
Use of general purpose adsorption isotherms for heavy metal clay mineral interactions
Altin, O; Özbelge, Hilmi Önder; Dogu, T (Elsevier BV, 1998-02-01)
General purpose adsorption isotherm equations were fitted to the sorption data of lead and cadmium on both unmodified and Ca-saturated kaolinite and montmorillonite. Langmuir-Freundlich, Redlich-Petersen, Toth, Dubinin-Radushkevich, competitive Langmuir, and some modified forms of these isotherms were fitted to experimental data, and their goodnesses of fit are compared. The adjustable parameters of the Langmuir-and Freundlich-based isotherms were estimated by nonlinear least-squares analysis. The applicati...
Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes
Tunc, Lutfi Taner; Özşahin, Orkun (Springer Science and Business Media LLC, 2018-09-01)
Research on dynamics and stability of machining operations has attracted considerable attention. Currently, most studies focus on the forward solution of dynamics and stability in which material properties and the frequency response function at the tool tip are known to predict stable cutting conditions. However, the forward solution may fail to perform accurately in cases wherein the aforementioned information is partially known or varies based on the process conditions, or could involve several uncertaint...
Use of single-pellet moment technique for studying surface-catalyzed gas reactions.
Ozan, Nazan; Department of Chemical Engineering (1981)
Use of Fourier transform infrared spectroscopy for rapid comparative analysis of Bacillus and Micrococcus isolates
Garip, Sebnem; Gözen, Ayşe Gül; Severcan, FERİDE (Elsevier BV, 2009-04-15)
The identification of foodborne microorganisms and their endospores in food products are important for food safety. The present work compares Bacillus (Bacillas licheniformis, Bacillus circulans and Bacillus silbtilis) and Micrococcus (Micrococcus luteus) species with Fourier transform infrared (FTIR) spectroscopy. Our results show that there are several characteristic peaks belonging to both the Micrococcus and Bacillus Species Which Call be used for the identification of these foodborne bacteria and their...
Citation Formats
B. Yükseler, “Use of geochemical properties of crude oils for reservoir characterization,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr