Performance evaluation and improvements of inverse compressor cascade design

Download
093376.pdf
2000
Kaplan, Burak
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/6631
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Performance optimization of monopulse tracking radar
Şahin, Mehmet Alper; Leblebicioğlu, Mehmet Kemal; Department of Electrical and Electronics Engineering (2004)
An analysis and simulation tool is developed for optimizing system parameters of the monopulse target tracking radar and observing effects of the system parameters on the performance of the system over different scenarios. A monopulse tracking radar is modeled for measuring the performance of the radar with given parameters, during the thesis studies. The radar model simulates the operation of a Class IA type monopulse automatic tracking radar, which uses a planar phased array. The interacting multiple mode...
Performance analysis of screw compressors
Çetiner, H Begüm; Eralp, O.Cahit; Akkök, Metin; Department of Mechanical Engineering (1999)
Performance Evaluation and Comparison of Single-Phase and Two-Phase Interleaving Flyback Micro-Inverters for Grid Connected PV Systems
Kavurucu, Semih; Hava, Ahmet Masum (2014-06-04)
Flyback converter based single-stage, microinverters are attractive solution for interfacing individual PV modules to the grid due to their low cost, high performance, ease of implementation, and galvanic isolation. In such applications, discontinuous conduction mode (DCM) of operation and interleaving techniques bring additional size and performance advantages such as eliminating reverse recovery loss, switching stress, EMI radiation, and improving efficiency. This paper focuses on performance evaluation o...
Performance prediction of horizontal axis wind turbines using Vortex theory
Yücel, Burak; Çetinkaya, Tahsin Ali; Department of Mechanical Engineering (2004)
Performance prediction of HAWTs is important because it gives an idea about the power production of a HAWT in out of design conditions without making any experiments. Since the experiments of fluid mechanics are difficult to afford, developing some models is very beneficial. There are some models developed about this subject using miscellaneous methods. In this study, one can find أVortex Theoryؤ among one of these theories. Some basic 3D aerodynamics was discussed in order to make the reader to understand ...
Performance improvement and comparison of concentrated winding segmental rotor and double stator switched reluctance machines
Bostancı, Emine; Cosoroaba, Eva; Moallem, Mehdi; Fahimi, Babak (2017-01-12)
Switched reluctance machine (SRM) is well known for its simple and robust design as well as its good high speed performance. On the other hand, its shortcomings are the moderate power/torque density, high torque ripple and high acoustic noise. Having one of the simplest mechanical designs, these machines have potential for a significant improvement. Accordingly, segmental rotor and double stator SRM (DSSRM), which also has a segmental rotor shared by two stators, are designed to improve the performance of S...
Citation Formats
B. Kaplan, “Performance evaluation and improvements of inverse compressor cascade design,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr