Modelling plume rise and dispersion of power plant flue gases discharged through cooling towers

Date

2003-05-01

Author

Oguz, O
Yurteri, C
Tuncel, G

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

113
views

0
downloads

URI

https://hdl.handle.net/11511/66444

Collections

Department of Environmental Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Modelling reinjection of two-phase non-condensable gases and water in geothermal wells Leontidis, Vlasios; Niknam, Pouriya H.; Durgut, Ismail; Talluri, Lorenzo; Manfrida, Giampaolo; Fiaschi, Daniele; Akın, Serhat; Gainville, Martin (2023-03-01) Steam production from high enthalpy geothermal systems is frequently accompanied by the emission of non-condensable gases (NCGs), initially dissolved in the liquid phase or mixed in the vapour phase at depth in the reservoir. Capturing and reinjecting geothermal gases (CO2, CH4, NH3, H2S, H2, …) together with condensed steam leads to a significant improvement of the environmental profile of geothermal power systems and helps with reservoir recharge and pressure support. Nowadays, there are several ongoing p...
Modeling oxidation and plasticity induced damage in thermal barrier coatings (TBCS) Sait, Ferit; Gürses, Ercan; Department of Aerospace Engineering (2020) Computational analysis and simulation of multi-physics phenomena taking place in coating systems is still a challenging task. Specifically, for ceramic coatings used as protective systems for base materials against elevated temperatures, known as thermal barrier coating (TBC) systems, construction of continuum level models which can express coupled nonlinear phenomena has attracted great attention. Thermal stresses, oxidation, creep and numerous other mechanisms and phenomena make it even harder to model an...
Modelling the difference between gravimetric and GPS/levelling geoids Yıldırım, Abdullah; Usul, Nurünnisa; Ayhan, Emin; Department of Geodetic and Geographical Information Technologies (2000)
Modeling natural attenuation of petroleum hydrocarbons (btex) in heterogeneous aquifers Uçankuş, Tuğba; Ünlü, Kahraman; Department of Environmental Engineering (2005) Natural Attenuation can be an effective cleanup option for remediation of Groundwater contamination by BTEX. One of the important aspects of the methodology that has been recognized recently is that mass removal rates, the most important parameters used to determine effectiveness of the methodology, is controlled by groundwater flow regime, which to a large extent controlled by aquifer heterogeneity. Considering this recognition, the primary objective of this research is to quantitatively describe the relat...
Modelling leachate quality and quantity in municipal solid waste landfills Yildiz, ED; Ünlü, Kahraman; Rowe, RK (SAGE Publications, 2004-04-01) The operational phase of landfills may last for 20 years or more. Significant changes in leachate quality and generation rate may occur during this operational period. A mathematical model has been developed to simulate the landfill leachate behaviour and distributions of moisture and leachate constituents through the landfill, taking into consideration the effects of time-dependent landfill development on the hydraulic characteristics of waste and composition of leachate. The model incorporates governing e...

Citation Formats

O. Oguz, C. Yurteri, and G. Tuncel, “Modelling plume rise and dispersion of power plant flue gases discharged through cooling towers,” 2003, vol. 16, p. 583, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/66444.