Hybrid analytical/FEM optimization design of SPMSM for refrigerator compressor loads

Date

2011-09-10

Author

Gradinaru, Vlad
Tutelea, Lucian
Boldea, Ion

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

43
views

0
downloads

On the growing market of home appliances, the choice of the right motor is very challenging. What once was the field of universal motors became a fertile territory for PMSMs, especially at medium to high speeds.

Subject Keywords

Finite-element, Cogging torque, Machines, Motors

URI

https://hdl.handle.net/11511/66642

Collections

Unclassified, Conference / Seminar

Suggestions

OpenMETU
Core

Mechanical and Thermal Design of an Optimized PCB Motor for an Integrated Motor Drive System with GaNFETs Tokgöz, Furkan; Gulsuna, Ozgur; Karakaya, Furkan; Çakal, Gökhan; Keysan, Ozan (2022-01-01) PCB motors are a viable alternative to commercial electric motors as they are easy to mass-produce and have low manufacturing costs. Moreover, integrated motor drives have gained popularity thanks to their high power density and ease of installation. However, the mechanical and thermal aspects are challenging due to reduced volume. In this paper, a GaNFET switched integrated motor drive axial-flux permanent magnet synchronous machine with a printed circuit board (PCB) stator is designed. The machine is opti...
Gas permeation properties of poly(arylene ether ketone) and its mixed matrix membranes with polypyrrole Mergen, Görkem; Toppare, Levent Kamil; Yılmaz, Levent; Department of Polymer Science and Technology (2003) For the last two decades, the possibility of using synthetic membranes for industrial gas separations has attracted considerable interest since membrane separation technologies have the advantages of energy efficiency, simplicity and low cost. However, for wider commercial utilization there is still a need to develop membranes with higher permeant fluxes and higher transport selectivities. Conductive polymers, due to their high gas transport selectivities, give rise to a new class of polymeric materials for...
ENGINEERING EMOTIONAL DESIGN (ENGAGE) Hasdoğan, Gülay Fatma(2004-11-11) Today the bottleneck in introducing new successful products quickly to the market has moved from factory floor manufacturing to the product specification, design and evaluation process, although of course world-class manufacturing remains essential. 'Quality' has moved beyond functionality and usability to satisfying people's subjective and emotional lifestyle needs. This can only be achieved by breakthrough knowledge-based changes in the conception of products to maintain and increase EU competitiveness un...
A study on the reliability analysis during preliminary design : a rocket motor example Bozkaya, Kenan; Akkök, Metin; Department of Mechanical Engineering (2006) To be competitive in the market, it is very important to design cost effective and reliable products. For this purpose, it is necessary to consider reliability as an integral part of the design procedure. Therefore, reliability which is a design parameter that affects cost and safety of a system should be taken into consideration in early phases since it is very difficult to change design at the later phases. Reliability of a rocket motor can be evaluated by reliability testing but these tests are very expe...
Design of synchronous reluctance machines with a wide speed range Yılmaz, Yusuf Basri; Bostancı, Emine; Department of Electrical and Electronics Engineering (2021-9-10) Synchronous reluctance machines (SynRMs) are a good alternative for traction and industrial applications due to their good power density, low cost and high efficiency. However, they suffer from high torque ripple, low power factor and poor high speed performance due to their singly excited nature. To overcome these challenges, rotor geometries are optimized to get a low torque ripple and ferrite magnets are inserted in the flux barriers to get a higher power factor and a better high speed performance. Thi...

Citation Formats

V. Gradinaru, L. Tutelea, and I. Boldea, “Hybrid analytical/FEM optimization design of SPMSM for refrigerator compressor loads,” 2011, p. 657, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/66642.