Thermal and photocatalytic oxidation of carbon monoxide over titanium dioxide-effects of platinum deposition

Download
2001
Özen, İstem

Suggestions

Thermal degradation of polythiophene-natural rubber and polythiophene-synthetic rubber conducting polymer composites
Hacaloğlu, Jale; Akbulut, Ural; Toppare, Levent Kamil (1997-01-01)
Thermal degradation of conducting polymer composites of polythiophene and rubbers was studied by direct and indirect pyrolysis mass spectrometry techniques. The samples were prepared by electrooxidation of polythiophene using natural rubber or synthetic rubber as the insulating matrix. Presence of decomposition products which were not observed during pyrolysis of pure polythiophene and rubbers, and disappearance of rubber-based pyrolysis mass peaks, together with changes in thermal stability and behaviour, ...
Thermal degradation of poly(p-phenylene-graft-ε-caprolactone) copolymer
Nur, Yusuf; Yurteri, Seda; Cianga, Ioan; Yagci, Yusuf; Hacaloğlu, Jale (2007-01-01)
The thermal degradation of poly (p-phenylene-graft-epsilon-caprolactone) (PPP), synthesized by Suzuki polycondensation of poly(E-caprolactone) (PCL) with a central 2,5-dibromo-1,4-benzene on the chain with 1,4-phenylene-diboronic acid, has been studied via direct pyrolysis mass spectrometry. The thermal degradation occurred mainly in two steps. In the first step, decomposition of PCL chains occurred. A slight increase in thermal stability of PCL chains was noted. In the second stage of pyrolysis, the decomp...
Thermal Degradation of Polylactide and Its Electrospun Fiber
Ozdemir, Esra; Hacaloğlu, Jale (2016-01-01)
Thermal degradations of poly(lactic acid), (PLA) and its fiber were studied via direct pyrolysis mass spectrometry. As the amount of PLA pyrolyzed was increased the relative yields of protonated and cyclic oligomers were increased indicating that inter-molecular interactions were promoted. Hydrolysis reactions caused significant decrease in the relative yields of high mass products. Intermolecular trans-esterifications were more effective during the pyrolysis of PLA fiber. On the other hand, PLA fiber showe...
Thermal degradation of poly(propylene oxide) and polyepichlorohydrin by direct pyrolysis mass spectrometry
Uyar, T; Hacaloğlu, Jale (2002-09-01)
The thermal degradation of poly(propylene oxide), (PPO) and polyepichlorohydrin, (PECH) were studied with the use of direct pyrolysis mass spectrometry. The effects of heating rate and dissociative ionization on fragmentation pattern have also been investigated. It has been determined that PPO degrades via a random cleavage mechanism, the labile C-O bond scissions being preferred, An analogous degradation mechanism can be proposed for PECH. Yet, the elimination of side chains, evolution of HCl and the loss ...
Thermal and structural characterization of polypyrrole by direct-insertion probe pyrolysis mass spectrometry
Uyar, T.; Toppare, Levent Kamil; Hacaloğlu, Jale (2001-03-15)
There have been extensive studies on structural characterization of conducting polypyrrole, PPY using various techniques. The two proposed structures are the aromatic form corresponding to the undoped state and the quinoid form corresponding to the doped state. However, actual structure appears to be more complicated and the relationship between the dopant used and the structure was not totally clarified. In this study direct insertion probe pyrolysis mass spectrometry technique was applied to monitor therm...
Citation Formats
İ. Özen, “Thermal and photocatalytic oxidation of carbon monoxide over titanium dioxide-effects of platinum deposition,” Middle East Technical University, 2001.