COMPARISON OF REED-SOLOMON DECODER IMPLEMENTATIONS BASED ON 2 DIFFERENT MICROPROCESSORS

Date

1991-05-24

Author

SUT, E
OZDEMIR, FT
YUCEL, MD
BILGEN, S

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

39
views

0
downloads

URI

https://hdl.handle.net/11511/67445

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Comparison of the 2D and 3D analyses methods for CFRDS Özel, Halil Fırat; Arıcı, Yalın; Department of Civil Engineering (2012) The purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a Concrete Faced Rockfill Dam (CFRD) under static and dynamic loading conditions. Çokal Dam is the case study which is a CFRD located in northwest Turkey at the Thracian Peninsula. Rockfill interface and faceplate were simulated as nonlinear modulus of elasticity, detailed nonlinear tractive behavior and total strain rotating crack model, respectively. These behaviors were calibrated to define the exact behavi...
Comparison of position controllers designed for an elastic system using its complete and deficient dynamic models Özgören, Mustafa Kemal (2010-01-01) This article is concerned with comparing the position controllers designed for an elastic system using its complete and deficient dynamic models. The system considered here as an application example consists of three rotors connected with two elastic shafts. Three kinds of controller are designed and compared. Controller-3 is designed using the complete dynamic model of the system. Therefore, it works perfectly, satisfying all the specified requirements. Controller-2 is designed based on a deficient model t...
COMPARISON OF ASCE/SEI STANDARD (2010) AND MODAL PUSHOVER BASED GROUND MOTION SCALING PROCEDURES FOR PRE-TENSIONED CONCRETE BRIDGES Özgenoğlu, Müge; Arıcı, Yalın (null; 2017-11-01) The seismic design and evaluation of large bridges is a demanding task owing to the significant size and the structural characteristics of these systems. Although elastic analysis methods are regarded as sufficient for common, uncritical bridges; complex analysis methods such as non-linear time history analysis (NTHA) are often required for non-standard and/or important bridges. The selection of the ground motions that will be used in non-linear time history analysis is a crucial task in this regard as the ...
Comparison of ASCE/SEI standard (2010) and modal pushover based ground motion scaling procedures for pre-tensioned concrete bridges Özgenoğlu, Müge; Arıcı, Yalın; Department of Civil Engineering (2015) The seismic design and evaluation of large bridges is a demanding task owing to the significant size and the structural characteristics of these systems. Although elastic analysis methods are regarded as sufficient for common, uncritical bridges; complex analysis methods such as non-linear time history analysis (NTHA) are often required for non-standard and/or important bridges. The selection of the ground motions that will be used in non-linear time history analysis is a crucial task in this regard as the ...
Comparison of different aspect ratio cooling channel designs for a liquid propellant rocket engine Boysan, M. E.; Ulaş, Abdullah; Toker, K. A.; Seckin, B. (2007-06-16) High combustion temperatures and long operation durations require the use of cooling techniques in liquid propellant rocket engines. For high-pressure and high-thrust rocket engines with long operation times, regenerative cooling is the most preferred cooling method. In regenerative cooling, a coolant flows through passages formed either by constructing the chamber liner from tubes or by milling channels in a solid liner. Traditionally, approximately square cross sectional channels have been used. However, ...

Citation Formats

E. SUT, F. OZDEMIR, M. YUCEL, and S. BILGEN, “COMPARISON OF REED-SOLOMON DECODER IMPLEMENTATIONS BASED ON 2 DIFFERENT MICROPROCESSORS,” 1991, p. 614, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/67445.