CONTROL CONFIGURATION SELECTION FOR THE INFERENTIAL CONTROL OF A HIGH-PURITY DISTILLATION COLUMN

Date

1992-09-08

Author

ALKAYA, D
ARIBURNU, D
OZGEN, C
GURKAN, T

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

97
views

0
downloads

URI

https://hdl.handle.net/11511/67583

Collections

Department of Chemical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Control configuration selection for a high-purity industrial distillation column with side stream Taskin, Mustafa Ertan; Özgen, Canan; Department of Chemical Engineering (1993)
Control of the thickness distribution of evaporated functional electroceramic NTC thermistor thin films Schmidt, R.; Parlak, Mehmet; Brinkman, Am (Elsevier BV, 2008-04-01) In this work the thickness distribution of NTC thermistor thin films produced by low deposition rate (0.8 nm s(-1)) electron-beam evaporation is investigated. The target preparation, deposition conditions and geometrical set-up of the evaporation mechanism are described in detail. The evaporation geometry is shown to be critical for the thickness distribution of evaporated films. The film thickness distribution of evaporated layers was measured across a macroscopic film surface using Alpha Step stylus profi...
Control allocation against actuator failures in overactuated small satellites Kahraman, Özgür; Tekinalp, Ozan; Department of Aerospace Engineering (2007) In this thesis, attitude control of small satellites with dissimilar actuator is studied and the effects of control allocation methods on maneuvering are examined in detail. Magnetorquers and reaction wheels are considered as the actuators of a modeled remote sensing -nadir pointing- small satellite. Matlab® Simulink simulation models are developed to model the satellite dynamics and the actuators on the satellite. The simulations are based on conceptual RASAT satellite, and, for verification, orbit data is...
Control of self-induced pitching vibrations of of an airfoil: downstream cylinder Perçin, Mustafa; Çetiner Yıldırım, Nuriye Leman Okşan; Ünal, Mehmet Fevzi (2006-09-10)
Control of underactuated planar pronking through an embedded spring-mass Hopper template Ankaralı, Mustafa Mert; Saranlı, Uluç (Springer Science and Business Media LLC, 2011-02-01) Autonomous use of legged robots in unstructured, outdoor settings requires dynamically dexterous behaviors to achieve sufficient speed and agility without overly complex and fragile mechanics and actuation. Among such behaviors is the relatively under-studied pronking (aka. stotting), a dynamic gait in which all legs are used in synchrony, usually resulting in relatively slow speeds but long flight phases and large jumping heights. Instantiations of this gait for robotic systems have been mostly limited to ...

Citation Formats

D. ALKAYA, D. ARIBURNU, C. OZGEN, and T. GURKAN, “CONTROL CONFIGURATION SELECTION FOR THE INFERENTIAL CONTROL OF A HIGH-PURITY DISTILLATION COLUMN,” 1992, p. 157, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/67583.