Rotary bending fatigue properties of high carbon Karabük steels.

Date

1962

Author

Toraman, Sevim

Metadata

Show full item record

Item Usage Stats

125
views

0
downloads

URI

https://hdl.handle.net/11511/6816

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Radial Junction Crystalline Silicon Solar Cells By Metal Assisted Electroless Etching Baytemir, Gülsen; Es, Fırat; Turan, Raşit (null; 2016-10-28)
Radial junction solar cells prepared on crystalline si by metal assisted electroless etching Baytemir, Gülsen; Es, Fırat; Turan, Raşit (null; 2016-06-05) Radial junction solar cell has been proposed as an alternative device geometry to conventional planar solar cells with its remarkable electrical and optical performance. In this geometry, micro/nano pillars on the surface allow minority carrier collection in the radial direction and shorten the carrier diffusion length. Moreover, increased light trapping in the pillars and reduced reflection from surface enhance the solar cell efficiency. In their letter (article no. 1600444) Baytemir et al. have investigat...
Radial junction solar cells prepared on single crystalline silicon wafers by metal-assisted etching BAYTEMİR, Gulsen; ES, FIRAT; ALAGOZ, Arif Sinan; Turan, Raşit (2017-05-01) Radial junction solar cells have been proposed as an alternative device geometry to conventional planar solar cells with its remarkable electrical and optical performance. In this geometry, densely packed nano/micropillars allow minority carrier collection in the radial direction and shorten carrier diffusion length to p-n junction. Besides, reduced reflection from surface and increased light trapping in nano/micropillars enhance solar cell efficiency. In this study, photolithography and metal-assisted etch...
Dry grinding kinetics of binary mixtures of ceramic raw materials by Bond milling Ipek, H; Ucbas, Y; Yekeler, M; Hoşten, Çetin (Elsevier BV, 2005-01-01) The kinetics of batch dry grinding of binary mixtures of ceramic raw materials, namely quartz-kaolin, quartz-potassium feldspar and kaolin-potassium feldspar, from the feed sizes of -3.350 + 2.360, -2.000 + 1.400, -0.850 + 0.600, -0.500 + 0.355 and -0.300 + 0.212 mm have been determined using a Bond mill with a mixture of ball sizes of 38.10, 31.75, 25.40, 19.05 and 12.70 mm diameter and total mass of 22.648 kg. The Bond mill used was a size of 30.5 cm diameter, 30.5 cm length, with a total volume of 22,272...
Arc gap proetction of high voltage distribution plant. Tepetaş, Osman; Department of Electrical Engineering (1971)

Citation Formats

S. Toraman, “Rotary bending fatigue properties of high carbon Karabük steels.,” Middle East Technical University, 1962.