Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Unsteady state heat conduction in solid bodies with internal heat sources.
Date
1964
Author
Yeşin, A Orhan
Metadata
Show full item record
Item Usage Stats
13
views
0
downloads
Cite This
URI
https://hdl.handle.net/11511/6832
Collections
Graduate School of Natural and Applied Sciences, Thesis
Suggestions
OpenMETU
Core
UNSTEADY AERODYNAMICS OF CAMBERED AIRFOILS AT LOW REYNOLDS NUMBER
AHMED, TAWFIQ; Kurtuluş, Dilek Funda; Department of Aerospace Engineering (2022-2)
Almost all the insects and birds fly at very low Reynolds numbers. Therefore, to design micro air vehicles (MAVs), a study of airfoils and wings at low Reynolds numbers is essential. Unsteady flow behavior at low Reynolds numbers can vary for different airfoils depending on their camber, maximum thickness, or maximum camber position. Numerical simulations of cambered airfoils (NACA 1412, NACA 2412, NACA 3412, NACA 4412) at Re = 1000 are conducted in the current study to understand the camber effect on the u...
UNSTEADY AERODYNAMICS OF CAMBERED AIRFOILS AT LOW REYNOLDS NUMBER
Ahmed, Tawfiq; Kurtuluş, Dilek Funda (2021-09-10)
Undrained shear strength of remoulded clays as measured by the laboratory vane and fall cone tests.
Yüksel, Selçuk; Wasti, Yıldız; Özkan, Yener; Department of Civil Engineering (1993)
Inelastic buckling of columns with non-uniform cross sections.
Keyder, Engin; Department of Civil Engineering (1962)
NONDESTRUCTIVE MONITORING OF VARIATIONS OF RESIDUAL STRESSES IN STEEL WELDMENTS BY MAGNETIC BARKHAUSEN NOISE METHOD
Gür, Cemil Hakan; Batıgün, Caner; Çam, İbrahim (2013-07-18)
Variations of surface residual stresses as a function of weld runs in API 5L X70 steel plates were non-destructively monitored by Magnetic Barkhausen Noise (MBN) method. After each weld run, MBN signal and hardness distributions were recorded. MBN signals were converted into stress values by using a specific calibration procedure. The results were analyzed by considering microstructure investigations and hardness measurements, and then, they were compared with the results of X-ray diffraction measurements. ...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
A. O. Yeşin, “Unsteady state heat conduction in solid bodies with internal heat sources.,” Middle East Technical University, 1964.