Closed loop speed control of a woundrotor induction motor by the chopper controlled external resistance in its rotor circuits.

1983
Soyerman, Fatih

Suggestions

Closed loop speed control of a squirrel cage induction motor by a variable frequency supply.
Nalçaci, A Erbil; Department of Electrical Engineering (1981)
Closed-loop aerodynamic flow control of a free airfoil
Brzozowski, Daniel P.; Culp, John R.; Kutay, Ali Türker; Muse, Jonathan A.; Glezer, Ari (null; 2008-12-01)
Transitory flow arising from the dynamic response of a free-moving airfoil model to commanded pitch and plunge maneuvers is investigated in wind tunnel experiments. The airfoil is mounted on a 2-DOF traverse and its trim and dynamic characteristics are controlled using position and attitude feedback loops that are actuated by servo motors. Commanded maneuvers are achieved without moving control surfaces using bi-directional changes in the pitching moment over a range of angles of attack that are effected by...
Three phase Inverter Speed Control of AC Drives Motor using DSPic microcontroller
Dida, A. Hadj; Bourahla, M.; Ertan, Hulusi Bülent; Benghanem, M.; Benzina, M. E. (2015-09-04)
AC drives based on full digital control have reached the status of a maturing technology in a broad range of applications, ranging from low-cost to high performance systems. In the field of the drive of the electric machines, the elimination of the mechanical speed sensor can present an economic interest and improve safety of operation. With speed estimation, sensorless vector control is possible, meaning that the speed of induction machines without mechanical speed sensors can be controlled. The flux obser...
Single loop resonator: dual-band magnetic metamaterial structure
EKMEKÇİ, EVREN; Sayan, Gönül (Institution of Engineering and Technology (IET), 2010-03-04)
A novel sub-wavelength metamaterial structure, called a single loop resonator, is presented, providing two separate magnetic resonance frequencies in addition to an electric resonance in the microwave region. Transmission and reflection characteristics of the proposed topology are simulated using both Ansoft HFSS software and CST Microwave Studio software for the verification of numerical results. Effective medium parameters of this metamaterial structure are also extracted to demonstrate the presence of tw...
DOUBLE-OUTPUT INDUCTION GENERATOR OPERATING AT SUBSYNCHRONOUS AND SUPERSYNCHRONOUS SPEEDS - STEADY-STATE PERFORMANCE OPTIMIZATION AND WIND-ENERGY RECOVERY
CADIRCI, I; ERMIS, M (Institution of Engineering and Technology (IET), 1992-09-01)
The paper covers the steady-state analysis of a wound-rotor induction generator operated at varying shaft speeds in the subsynchronous and supersynchronous regions, by control of both the magnitude and direction of slip power. A modified equivalent circuit is used in the analyses in which core losses and harmonics are ignored. The resulting nonlinear algebraic equations are solved numerically. An optimum control strategy, which maximises the total electrical power output of the double output induction gener...
Citation Formats
F. Soyerman, “Closed loop speed control of a woundrotor induction motor by the chopper controlled external resistance in its rotor circuits.,” Middle East Technical University, 1983.