Application of computer programming in calculating ore reserves by using triangular, polygonal and statistical methods.

1971
Güyagüler, Tevfik
Show full item record
62
views
0
downloads
https://hdl.handle.net/11511/6888
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Application of computational fluid dynamics to predict hydrodynamic downpull on high head gates
Köken, Mete; Aydın, İsmail (2017-01-01)
Purpose - High head gates are commonly used in hydropower plants for flow regulation and emergence closure. Hydrodynamic downpull can be a critical parameter in design of the lifting mechanism. The purpose of this paper is to show that a simplified two-dimensional (2D) computational fluid dynamics solution can be used in the prediction of the downpull force on the gate lip by comparison of computed results to experimentally measured data.
Application of Machine Learning for Dragline Failure Prediction
TAGHIZADEH, Amir; Demirel, Nuray (2017-04-26)
Overburden stripping in open cast coal mines is extensively carried out by walking draglines. Draglines’ unavailability and unexpected failures result in delayed productions and increased maintenance and operating costs. Therefore, achieving high availability of draglines plays a crucial role for increasing economic feasibility of mining projects. Applications of methodologies which can forecast the failure type of dragline based on the available failure data not only help to reduce the maintenance and oper...
Application of geographic information system in earthquake loss estimates
Nuraliyev, Iskander; Polat, Gülkan; Department of Civil Engineering (1999)
Application of spring analogy mesh deformation technique in airfoil design optimization
Yang, Yosheph; Özgen, Serkan; Department of Aerospace Engineering (2015)
In this thesis, an airfoil design optimization with Computational Fluid Dynamics (CFD) analysis combined with mesh deformation method is elaborated in detail. The mesh deformation technique is conducted based on spring analogy method. Several improvements and modifications are addressed during the implementation of this method. These enhancements are made so that good quality of the mesh can still be maintained and robustness of the solution can be achieved. The capability of mesh deformation is verified by...
Application of X-ray CT imaging as an alternative tool for cloud point determination
Karacan, C.Ö.; Demiral, M.R.B.; Kök, Mustafa Verşan (2000-01-01)
This study explains the use of X-Ray CT (computerized tomography) as an alternative tool for cloud point determination of crude oils and dark fuel oils by showing the results for artificially prepared transparent oils. The technique is fully computerized and data gathering and analysis are achieved by taking the advantage of the processing of the CT images. In the study, the cloud points of diesel oil samples containing 5%, 10% and 15% additional wax were determined with this new technique. Results show tha...
Citation Formats
T. Güyagüler, “Application of computer programming in calculating ore reserves by using triangular, polygonal and statistical methods.,” Middle East Technical University, 1971.
METU IIS - Integrated Information Service open@metu.edu.tr