Average passage flow field and deterministic stresses in the tip and hub regions of a multistage turbomachine

2003-10-01
Uzol, Oğuz
Katz, Joseph
Meneveau, Charles
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
38
views
0
downloads
Mechanical Engineering
https://hdl.handle.net/11511/69587
Journal Of Turbomachinery-Transactions Of The Asme
Department of Aerospace Engineering, Article

Suggestions

Model updating of a helicopter structure using a newly developed correlation improvement technique
Altunel, Fatih; Çalışkan, Mehmet; Department of Mechanical Engineering (2009)
Numerical model usage has substantially increased in many industries. It is the aerospace industry that numerical models play possibly the most important role for development of optimum design. However, numerical models need experimental verification. This experimental verification is used not only for validation, but also updating numerical model parameters. Verified and updated models are used to analyze a vast amount of cases that structure is anticipated to face in real life. In this thesis, structural ...
Assessment of hand-type hammer drill bits under percussive loading
Demir, Osman Koray; Çalışkan, Mehmet; Department of Mechanical Engineering (2007)
The task of a drill bit in percussive drilling is to transport the initial kinetic energy of the hammer to the workpiece in terms of stress waves. The efficiency of this transportation and the stresses that the drill bit is exposed to during the process is dependent on the nature of the stress waves. In hand-type hammer drilling, changing dimensions of the bit means changing conditions for the propagation and interaction of the stress waves. In this study, using finite element method, wave propagation and i...
Optimal design of truss structure with actuators /
Akgöz, Aslı; Balkan, Raif Tuna; Department of Mechanical Engineering (2004)
Analysis of heat treatment effect on springback in v-bending
Sarıkaya, Onur Turgay; Darendeliler, Haluk; Department of Mechanical Engineering (2008)
Aluminum based alloys have wide area of usage in automotive and defense industry and bending processes are frequently applied during production. One of the most important design criteria of bending processes is springback, which can be basically defined as elastic recovery of the part during unloading. To overcome this problem, heat treatment is generally applied to the workpiece material to refine tensile properties. In this study, the effect of heat treatment on springback characteristics of aluminum stud...
Determination of vibroacoustical behavior of plates by intensity methods
İnalpolat, Murat; Çalışkan, Mehmet; Department of Mechanical Engineering (2004)
In this study, sound radiation and power flow characteristics of plates which constitute the bodies of common engineering applications like cars and household appliances are investigated. Three different vibro-acoustical measurement techniques are used in an integrated manner and results obtained are compared with those obtained from analytical models developed. Two-microphone sound intensity measurement with a probe utilizing side-by-side configuration is used to analyze the near-field radiation characteri...
Citation Formats
O. Uzol, J. Katz, and C. Meneveau, “Average passage flow field and deterministic stresses in the tip and hub regions of a multistage turbomachine,” Journal Of Turbomachinery-Transactions Of The Asme, pp. 714–725, 2003, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/69587.
METU IIS - Integrated Information Service open@metu.edu.tr