Fundamental of Biomaterials

Date

2018-10-01

Author

Hasırcı, Nesrin
Hasırcı, Vasıf Nejat

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

184
views

0
downloads

URI

https://hdl.handle.net/11511/70507

Collections

Graduate School of Natural and Applied Sciences, Book / Book chapter

Suggestions

OpenMETU
Core

Implementation of coupled thermal and structural analysis methods for reinforced concrete structures Albostan, Utku; Kurç, Özgür; Department of Civil Engineering (2013) Temperature gradient causes volume change (elongation/shortening) in concrete structures. If the movement of the structure is restrained, significant stresses may occur on the structure. These stresses may be so significant that they can cause considerable cracking at structural components of large concrete structures. Thus, during the design of a concrete structure, the actual temperature gradient in the structure should be obtained in order to compute the stress distribution on the structure due to therma...
Implementation of mesh generation algorithms Yıldız, Özgür; Yüksel, Önder; Kuzuoğlu, Mustafa; Department of Electrical and Electronics Engineering (2001) In this thesis, three mesh generation software packages have been developed and implemented. The first two were based on structured mesh generation algorithms and used to solve structured surface and volume mesh generation problems of three-dimensional domains. Structured mesh generation algorithms were based on the concept of isoparametric coordinates. In structured surface mesh generation software, quadrilateral mesh elements were generated for complex three-dimensional surfaces and these elements w...
IMPLEMENTATION OF STRONG LIGHT-MATTER INTERACTION FOR FABRICATION AND LIGHT MANAGEMENT OF THIN CRYSTAL SILICON SOLAR CELLS Zolfaghari Borra, Mona; Bek, Alpan; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2021-7-29) The integration of photonic components with electrical elements on the same silicon chip may lead to the development of new technologies. One limitation is the space available on the wafer surface, which is restricted. Currently, conventional fabrication techniques produce devices only on the top thin layer of the wafer surface. As a result, new architectural designs are required. Producing functional components deep inside Si without creating damage to the surfaces is a potential technique for overcoming t...
Applications of Computerized X ray Tomography in Geology and Related Domains Akın, Serhat (2003-01-01)
Implementation of k-epsilon turbulence models in a two dimensional parallel navier-stokes solver on hybrid grids Kalkan, Onur Ozan; Tuncer, İsmail Hakkı; Department of Aerospace Engineering (2014) In this thesis, the popular k-ε turbulence model is implemented on a parallel, 2-dimensional, explicit, density-based, finite volume based Navier-Stokes solver works on hybrid grids, HYP2D. Among the other versions available in the open literature, standard version of the k-ε turbulence mode is studied. Launder-Spalding and Chieng-Launder wall functions are adapted to the turbulence model in order to investigate the effects of the strong gradients in the vicinity of the wall on the turbulence. In order to i...

Citation Formats

N. Hasırcı and V. N. Hasırcı, Fundamental of Biomaterials. 2018.