Examination of 2-Methacryloyloxyethyl Phosphorylcholine Polymer Coated Acrylic Resin:Surface Characteristics and Candida albicans Adhesion

Date

2017-05-04

Author

Türkcan, İrem
Nalbant, Asude Dilek
Bat, Erhan
Akca, Gülçin

Metadata

Show full item record

Item Usage Stats

86
views

0
downloads

URI

https://hdl.handle.net/11511/70785

Conference Name

22nd BASS Congress, Contemporary Challenges in Dentistry (2017)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Examination of 2-methacryloyloxyethyl phosphorylcholine polymer coated acrylic resin denture base material: surface characteristics and Candida albicans adhesion Turkcan, Irem; NALBANT, ASUDE DİLEK; Bat, Erhan; AKCA, GÜLÇİN (2018-07-01) The aim of this study is to evaluate the effects of 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer coating with various concentrations onto acrylic resin denture base material on surface characteristics such as contact angle and surface roughness and on Candida albicans adhesion which is the major factor of denture stomatitis. Specimens, prepared from heat-polymerized acrylic denture base material, were divided into control and three test groups, randomly. Surfaces of the specimens in test groups we...
Examination of the dielectrophoretic spectra of MCF7 breast cancer cells and leukocytes Çağlayan, Zeynep; Demircan Yalçın, Yağmur; Külah, Haluk (Wiley, 2020-03-01) The detection of circulating tumor cells (CTCs) in blood is crucial to assess metastatic progression and to guide therapy. Dielectrophoresis (DEP) is a powerful cell surface marker-free method that allows intrinsic dielectric properties of suspended cells to be exploited for CTC enrichment/isolation from blood. Design of a successful DEP-based CTC enrichment/isolation system requires that the DEP response of the targeted particles should accurately be known. This paper presents a DEP spectrum method to inve...
Examination of two types of dental bridge models by photoelasticity technique and experimental determination of chewing forces by strain gauge measurements. Akkoyunlu, Selim Erol; Department of Mechanical Engineering (1975)
Examination of differences between three SPT-based seismic soil liquefaction triggering relationships Çetin, Kemal Önder; Kayen, Robert E.; Moss, Robb E. S.; Bilge, Habib Tolga; Ilgaç, Makbule (Elsevier BV, 2018-10-01) The preceding companion paper presented the updating of the seismic soil liquefaction triggering relationship of Cetin et al. [1], and compared the resulting updated relationship with the earlier version. In this second paper, a detailed cross-comparison is made between three triggering relationships: (1) Seed et al. [2], as slightly updated by the NCEER Working Group (Youd et al. [3]), (2) Boulanger and Idriss [4], and (3) Cetin et al. [5]. Differences between these three triggering relationships, and the ...
Examination of Target RCS Characteristics in FDA Radars Cetintepe, Cagri; Demir, Şimşek (2014-07-11) This paper reports on the preliminary analysis of frequency diverse array (FDA) radars for simple target geometries. The radar system employs an FDA and a isotropic element as the transmitter and receiver antennas, respectively, and illuminates a target consisting of an arbitrary arrangement of ideal point scatterers. After establishing a signal model for the voltage waveform received by this radar system, the study then considers particular target arrangements and compares the average received power to tha...

Citation Formats

İ. Türkcan, A. D. Nalbant, E. Bat, and G. Akca, “Examination of 2-Methacryloyloxyethyl Phosphorylcholine Polymer Coated Acrylic Resin:Surface Characteristics and Candida albicans Adhesion,” presented at the 22nd BASS Congress, Contemporary Challenges in Dentistry (2017), Thessaloniki, Yunanistan, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/70785.