Hızlı Yaşa Genç Öl

Date

2010-03-01

Author

Zelef, Mustafa Haluk

Metadata

Show full item record

Item Usage Stats

60
views

0
downloads

URI

https://hdl.handle.net/11511/70916

Journal

Arredamento_Mimarlık

Collections

Unverified, Article

Suggestions

OpenMETU
Core

Hızlı Katılaşma Tekniği İle Demir Bazlı Yüksek Mukavemetli ve Sünek Amorf-Nanokristal Kompozit Çelik Üretimi Kalay, Yunus Eren(2016-12-31) Günümüzde, demir ve alaşımları, hayatın her adımında en çok kullanılan malzeme olarak karışımıza çıkmaktadır. Bu alaşımların en çok kullanıldığı alanlardan biri de otomotiv sektörüdür. Ancak demir alaşımlarının yüksek özgül ağırlığa (7,8 gr/cm3) sahip olması araçların yüksek ağırlıklara sahip olmasına sebep olmaktadır. Yüksek ağırlıklı araçlar ise daha fazla yakıt tüketimine ve yüksek oranlarda CO2 emisyonuna sebep olmaktadır. Çeliğin üstün özellikleriyle birlikte araçlarda kullanılıp hafif ve düşük CO2 emi...
A decomposition for the tilted channel of the fast fading channels Yıldız, Mücahit Furkan; Nakiboğlu, Barış; Department of Electrical and Electronics Engineering (2022-9) A decomposition property for the tilted channel of the fast fading channels with the channel state information at the receiver is proposed. A necessary and sufficient condition for the decomposition and the resulting expressions for the sphere packing exponent and the random coding exponent are determined. These expressions are used to calculate the error exponents for the discrete memoryless channels with certain symmetries. The existence of a similar decomposition property for Gaussian channels under Gaus...
Spray rolling of rapidly solidified Al-FeV-Si alloy Özyurda, Halit Akın; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2006) In this study an experimental spray-rolling set-up is designed in order to produce rapidly solidified Al-Fe-V-Si flat product. Al-Fe-V-Si alloys produced by rapid solidification powder metallurgy (RSP/M) methods are mostly used in high temperature applications in aerospace and automotive industries. The RSP/M technique used is spray deposition, which is desirable because of the high cooling rates achieved, as a result fine silicide dispersoids and intermetallics are observed in the microstructure which are ...
A New WAP-tree based sequential pattern mining algorithm for faster pattern extraction Önal, Kezban Dilek; Şenkul, Pınar; Department of Computer Engineering (2012) Sequential pattern mining constitutes a basis for solution of problems in various domains like bio-informatics and web usage mining. Research on this field continues seeking faster algorithms. WAP-Tree based algorithms that emerged from web usage mining literature have shown a remarkable performance on single-item sequence databases. In this study, we investigated application of WAP-Tree based mining to multi-item sequential pattern mining and we designed an extension of WAP-Tree data structure for multi-it...
Information Recovery-based Model Reference Adaptive Control for Fast Adaptation and Improved Transients with Aerospace Applications Yayla, Metehan; Kutay, Ali Türker; Department of Aerospace Engineering (2023-2-13) This thesis proposes improvements to Filter-based Model Reference Adaptive Control (MRAC) architectures for uncertain dynamical systems. Standard MRAC cannot guarantee closed-loop stability in the presence of bounded perturbations without restrictive persistent excitation of system signals. Robust modifications have been introduced to increase the robustness of standard MRAC and/or guarantee stability without persistent excitation, but little improvement has been achieved in guaranteed transient response. R...

Citation Formats

M. H. Zelef, “Hızlı Yaşa Genç Öl,” Arredamento_Mimarlık, pp. 71–75, 2010, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/70916.