Improvement of the gearbox testing apparatus and testing of various parameters of the gear drives.

1967
Şengül, Tekin

Suggestions

Improvement of uptake rate equations depending on meteorological conditions for 25 volatile organic compounds
CİVAN, MİHRİBAN; YURDAKUL, SEMA; Tuncel, Süleyman Gürdal (2012-09-15)
Stainless steel passive (diffusive) sampling tubes manufactured by Gradko International Ltd. (UK) were filled with Chromosorb 106 (Supelco) and evaluated to determine the uptake rates of 31 VOCs over six months under different meteorological conditions in a suburban area of Ankara, Turkey. The URs have been calculated, and dependence on such meteorological parameters as temperature, relative humidity and wind speed has been established for the 31 VOCs.
Optimization of the unit wood burner stove.
Bilir, Şefik; Department of Mechanical Engineering (1982)
Improvement of the electric field distribution in the medium voltage gas insulated inductive voltage transformers
Var, Melih; Keysan, Ozan; Department of Electrical and Electronics Engineering (2017)
IVoltage transformers are commonly used in medium voltage systems for both protection and measurement purposes. These transformers are designed to satisfy the mandatory IEC requirements at the lowest possible cost. The average life expectancy of such transformer is about 20 years, reliability and robustness are of the utmost importance. The main cause of failure during rated operation is the deterioration of the solid insulation by partial discharges. Partial discharges, unless there is a manufacturing erro...
Improvement of land cover classification with the integration of topographical data in uneven terrain.
Gerçek, Deniz; Toprak, Vedat; Department of Geodetic and Geographical Information Technologies (2002)
Improvement in the spring analogy mesh deformation method through the cell-center concept
Yang, Yosheph; Özgen, Serkan; Kim, Haedong (2021-08-01)
The mesh deformation method is an important topic in studies involving moving boundary problems. As one of the main approaches, this method has been applied in various related studies. To address the cell inversion problem encountered in the spring analogy mesh deformation method, the present study proposes an improvement in it by cell-center concept. In addition to the linear spring between two nodal points on the mesh, the cell-center concept introduces additional fictitious springs between the cell-cente...
Citation Formats
T. Şengül, “Improvement of the gearbox testing apparatus and testing of various parameters of the gear drives.,” Middle East Technical University, 1967.