Analysıs Of A Burıed Dome Under Blast And Gravıty Loads

1992-06-18
Sucuoğlu, Haluk
Show full item record
38
views
0
downloads
Materials Science, Mechanics
https://hdl.handle.net/11511/71228
https://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=6&SID=E2t6pEAD7BKFJnPbrYj&page=1&doc=1
2ND INTERNATIONAL CONF ON STRUCTURES UNDER SHOCK AND IMPACT ( SUSI 92 )
Department of Civil Engineering, Conference / Seminar

Suggestions

Investigation of the deep drawability of steel and aluminum sheets by finite element simulation
Sönmez, Çağlar; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2005)
Sheet metal forming processes, especially deep drawing processes give diverse results by various materials. Extreme differences occur between steel sheets and aluminum sheets. The main causes of this variance are anisotropy, elastic modulus and microscopic material properties. The aim of this thesis is to evaluate the deep drawing properties and also to develop suitable process parameters for aluminum and steel sheets by finite element simulation. In the simulation, the commercial dynamic-explicit code PAM-...
Assessing the Effects of Mechanical Preventive Measures on Alkali-Silica Reaction Expansion with Accelerated Mortar Bar Test
Musaoglu, Orhan; TURANLI, LUTFULLAH; Sarıtaş, Afşin (ASTM International, 2014-11-01)
This paper presents a modification to the apparatus of the mortar bar test of ASTM C490 in order to assess and compare the influence of mechanical preventive measures in reducing alkali-silica reaction (ASR) expansion in concrete with respect to the traditional measures. For this purpose, reinforced mortar specimens with or without pre-stressing force applied were examined and the effects of the reinforcement ratio and pre-stressing force on ASR-induced expansion and cracking were studied through the accele...
Characterization of dual-phase steels using magnetic barkhausen noise technique
KAPLAN, MÜCAHİT; Gür, Cemil Hakan; Erdogan, METEHAN (Springer Science and Business Media LLC, 2007-12-01)
The aim of this work is to nondestructively characterize the dual phase steels using the Magnetic Barkhausen Noise (MBN) method. By quenching of AISI 8620 steel specimens having two different starting microstructures, from various intercritical annealing temperatures (ICAT) in the ferrite-austenite region, the microstructures consisting of different volume fractions of martensite with morphological variations have been obtained. The microstructures were first conventionally characterized by metallographical...
A STUDY ON THE YIELD STRESS OF PERLITE-FILLED HIGH-DENSITY POLYETHYLENES
OKTEM, GA; TINCER, T (Springer Science and Business Media LLC, 1993-12-01)
Four different types of high-density polyethylenes were blended with expanded perlite at different compositions. Gamma-aminopropyltriethoxysilane was applied to perlite (2 wt%) from ether and water solutions to enhance the interfacial adhesion between the polymer and the filler. It was shown that silane treatment advances the yield stress with improving dispersion and increasing the interfacial adhesion of the filler with the polymer matrix. The experimental results were then checked with the expression of ...
Analysis of tempering treatment on material properties of DIN 41Cr4 and DIN 42CrMo4 steels
Bayrak, Mustafa; Ozturk, Fahrettin; Demirezen, Mehmet; Evis, Zafer (Springer Science and Business Media LLC, 2007-10-01)
DIN 41Cr4 and DIN 42CrMo4 materials have been widely used in automotive driving elements. Although 42CrMo4 is more expensive than 41Cr4, it is more preferable in terms of material properties. In this study, these two materials were heat treated by austenitizing in a continuous furnace at 850 degrees C and quenched in oil at 90 degrees C. After they were tempered at various temperatures, mechanical properties were determined for each tempering temperature. The material properties for both materials were comp...
Citation Formats
H. Sucuoğlu, “Analysıs Of A Burıed Dome Under Blast And Gravıty Loads,” PORTSMOUTH, ENGLAND, 1992, p. 601, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71228.
METU IIS - Integrated Information Service open@metu.edu.tr