Production of Fe60Co8Zr10Mo5W2B15 Bulk metallic Glass Matrix Composite by Semi-Solid Processing

Date

2012-08-12

Author

Akdeniz, Mahmut Vedat
Mehrabov, Amdulla

Metadata

Show full item record

Item Usage Stats

85
views

0
downloads

URI

https://hdl.handle.net/11511/71276

Conference Name

XXI. International Materials Research Congress (IMRS 2012)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Production of martite nanoparticles with high energy planetary ball milling for heterogeneous Fenton-like process Rahmani, Amir; Khataee, Alireza; Kaymak, Barış; Vahid, Behrouz; Fathinia, Mehrangiz; Dindarsafa, Mahsa (2016-01-01) Natural martite microparticles (NMMs) were prepared with a high energy planetary ball mill to form a nanocatalyst for a Fenton-like process. Martite nanoparticles (MNs) of different scales are formed when the milling time ranges from 1 to 5 h at the milling speed of 300 rpm. The catalytic performances of MNs are higher than the NMMs for the degradation of acid blue 5 (AB5) in a heterogeneous Fenton- like process. The NMMs and the MNs were characterized by SEM, EDX, BET, XRD and FT-IR analyses. The size dist...
Production of Nano Size TiO2 Sol and Highly Efficient Photocatalytic TiO2 Powder by Mechanical Ball Milling Corapci, E.; Aysin, B.; Öztürk, Abdullah; PARK, JONGEE (2010-06-16)
Production of copper-based shape memory alloy using powder metallurgy methods Ögel, Bilgehan; Dericioğlu, Arcan Fehmi ( Türk Toz Metalurjisi Derneği; 1999-12-01) A Cu-based shape memory alloy is produced using PM methods. The Cu-16.5Zn-6.5Al alloy is prepared from elemental powders. The production route includes the various combination of sintering, hot pressing and hot rolling. Zinc loss due to evaporation could not be avoided in conventional compaction and sintering route. On the other hand, a homogenization treatment after hot pressing leads to formation of pores in the microstructure. Directly hot rolled specimens after a hot pressing operation showed shape memo...
Production of Cu-based shape memory alloys from pure powders by conventional hot pressing Gürhan, Fatma Cansu; Ögel, Bilgehan; Bor, Şakir; Department of Metallurgical and Materials Engineering (2001)
Production of graphene oxide and polymer based nanocomposite microsieves via breath figure method Kıratlı, Ayşe Elif; Bat, Erhan; Çulfaz Emecen, Pınar Zeynep; Department of Chemical Engineering (2017) Porous polymer films are used in various different fields such as electronics, sensors, biomedical, catalysis, and separation. Breath figure (BF) is a method of obtaining porous polymers via a self-assembly process based on water condensation. In this process condensed water droplets can be regularly arranged on surface depending on process conditions. They continue to grow or sink until all solvent is evaporated. After complete evaporation, honeycomb shaped porous polymeric films are obtained. Amphiphilic ...

Citation Formats

M. V. Akdeniz and A. Mehrabov, “Production of Fe60Co8Zr10Mo5W2B15 Bulk metallic Glass Matrix Composite by Semi-Solid Processing,” Cancun, Meksika, 2012, p. 25, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71276.