Elektriksel Ölçüm ve Terahertz Teknolojileri

2012-07-01
Kayra Güllü, Seda
Akbar, Demiral
Altan, Hakan
Show full item record
97
views
0
downloads
http://mezun.metu.edu.tr/_docs/dergi/49/Dergi/odtulu49.pdf
https://hdl.handle.net/11511/71300
ODTÜLÜDERGİSİ
Unverified, Article

Suggestions

Theoretical and experimental investigation of residual stresses in electric discharge machining
Ekmekçi, Bülent; Erden, Abdülkadir; Department of Mechanical Engineering (2004)
Electric Discharge Machining (EDM) is a process for eroding and removing material by transient action of electric sparks on electrically conductive materials immersed in a dielectric liquid and separated by a small gap. A spark-eroded surface is a surface with matt appearance and random distribution of overlapping craters. It is mechanically hard and stressed close to ultimate tensile strength of the material and sometimes covered with a network of micro cracks. The violent nature of the process leads a uni...
Thermal behaviour of electrical insulators
Özkan, Mustafa; Ertaş, Arif; Department of Electrical and Electronics Engineering (2002)
High voltage insulators are always subjected to pollution during service. Depending upon the atmospheric conditions, there is an increase in leakage current along the contaminated surface of the insulator, which eventually leads to a rise in temperature. Therefore the performance of a contaminated high voltage insulator is quite different from the one under pollution free conditions. This study deals with the evaluation of electric potential and temperature distribution along the surface of an outdoor post ...
Performance of Electrical Power Flow Solvers: Case Studies
Ceylan, Özgün Ada; Uğur, Ömür; Department of Scientific Computing (2022-2-9)
Advancing technologies in distributed electrical generation and increasing amount of required electricity make electrical systems more complicated. Thus, the number of buses has increased and the size of incidence matrix for electrical power flow calculation has expanded. Hence, investigation and performance analysis on different solvers are needed. In this thesis, a performance comparison between iterative solvers for electrical power flow is studied. These solvers are Newton-Raphson, Fast-Decoupled and N...
Investigation of the effectiveness of electrical and microwave heating for oil shale extraction
Güven, Selin; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2015)
In this study, four different oil shales from Turkey (Bolu-Himmetoglu, Bolu-Hatildag, Kutahya-Seyitomer, Nigde-Ulukisla) that were subjected to retort and microwave heating w/wo three different iron powders (Fe, Fe2O3 and FeCl3) with optimized doses. TGA/DSC (Thermal Gravimetric Analysis/Differential Scanning Calorimetry), FTIR (Fourier Transform Infrared Spectroscopy), X-Ray Diffraction (XRD) and SEM (Scanning Electron Microscope) were used to characterize these samples. Then, the oil shale samples before ...
Solving the forward problem of electrical source imaging by applying the reciprocal approach and the finite difference method
Ahi, Sercan Taha; Gençer, Nevzat Güneri; Department of Electrical and Electronics Engineering (2007)
One of the goals of Electroencephalography (EEG) is to correctly localize brain activities by the help of voltage measurements taken on scalp. However, due to computational difficulties of the problem and technological limitations, the accuracy level of the activity localization is not perfect and should be improved. To increase accuracy level of the solution, realistic, i.e. patient dependent, head models should be created. Such head models are created via assigning realistic conductivity values of head ti...
Citation Formats
S. Kayra Güllü, D. Akbar, and H. Altan, “Elektriksel Ölçüm ve Terahertz Teknolojileri,” ODTÜLÜDERGİSİ, pp. 68–69, 2012, Accessed: 00, 2021. [Online]. Available: http://mezun.metu.edu.tr/_docs/dergi/49/Dergi/odtulu49.pdf.
METU IIS - Integrated Information Service open@metu.edu.tr