The Effect of Mg Addition on the Formation and Growth of Iron Aluminides in Aluminized Diffusion Layer

1995-09-25
Akdeniz, Mahmut Vedat
Mehrabov, Amdulla
Show full item record
69
views
0
downloads
https://hdl.handle.net/11511/71450
Unverified, Conference / Seminar

Suggestions

The effect of dissolved species on hydrophobic aggregation of fluorite
Hicyilmaz, C; Bilgen, S; Ozbas, KE (1997-03-10)
The hydrophobic aggregation of fluorite in the presence of Fe3+, Al3+, F- Ca2+, Mg2+ and Ba2+ ions was studied. Electrokinetic potentials were measured to interpret the effect of these ions on aggregation.
The effect of triethanolamine on thermal decomposition of GAP
Fazhoğlu, Hatice; Hacaloğlu, Jale (2002-01-01)
The effect of triethanolamine (TEA) on thermal behavior of glycidyl azide polymer (GAP) has been investigated by direct pyrolysis mass spectrometry technique. It has been observed that thermal degradation of GAP-TEA mixture also begins with the cleavage of the side groups as in the case of GAP. Again, the main decomposition started with the elimination of molecular nitrogen from the azide functional group, and a quite similar degradation mechanism has been proposed. The increase in the thermal stability of ...
The Effect of Calcined Colemanite Addition on the Mechanical Strength of Magnetite Pellets Produced with Organic Binders
SİVRİKAYA, OSMAN; Arol, Ali İhsan; Eisele, Timothy; Kawatra, S. Komar (2013-06-01)
Iron ore pellets must have sufficient mechanical strengths against degradation in all stages of pellet production. Low strength is also a problem for product pellets since they abrade during transportation to the reduction furnaces. The use of a binder is necessary to provide sufficient strength to the pellets and for better operation and handling of pellets. Bentonite is the standard binder in the industry; however, it is considered an impurity due to its acid oxide contents. Organic binders have been test...
The effect of crosslinking on thermal inactivation of cellulases
Bilen, J; Bakir, U (1998-04-22)
Cellulase complex was crosslinked by using three different crosslinkers, dimethyl suberimidate (DMS), dimethyl adipimidate (DMA) and dimethyl-3-3'-dithiobispropionimidate (DTBP) and their effects on thermal inactivation were investigated. These reagents are all homobifunctional bisimidoesters having different crosslinking distances and crosslink only amino groups to each other. No significant activity loss was observed due to crosslinking with none of the crosslinkers used. In general, DMA and DTBP crosslin...
The influence of polymerization temperature on structure and properties of polyaniline
Yilmaz, Faris; Kucukyavuz, Zuhal (2009-01-31)
The influence of polymerization temperature (from -25 to +25 degrees C) on molecular weight, crystallinity, electrical conductivity, thermal and morphological properties of polyaniline has been investigated. Aniline was oxidized in an aqueous medium with ammonium persulfate and 1.0 M hydrochloric acid. The reaction mixture freezes below -10 degrees C and hence lithium chloride was used in sufficient amount to prevent freezing. As the reaction temperature decreases, both the molecular weight of polyaniline a...
Citation Formats
M. V. Akdeniz and A. Mehrabov, “The Effect of Mg Addition on the Formation and Growth of Iron Aluminides in Aluminized Diffusion Layer,” 1995, vol. 4, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71450.
METU IIS - Integrated Information Service open@metu.edu.tr