Evaluation of pile bearing capacity and settlement by load tests

Download
007296.pdf
1989
Bircan, B. Tüzin
Show full item record
65
views
0
downloads
https://hdl.handle.net/11511/7152
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Evaluation of concrete strength of existing structures by-non-destructive and core tests
Akkaya, Ümit; Tokyay, Mustafa; Department of Civil Engineering (2001)
Evaluation of seismic response modification factors for steel frames by non-linear analysis
Bakır, Serhan; Yılmaz, Çetin; Department of Civil Engineering (2006)
In this study steel framing systems are investigated with regards to their lateral load carrying capacity and in this context seismic response modification factors of individual systems are analyzed. Numerous load resisting layouts, such as different bracing systems and un-braced moment resisting frames with various bay and story configurations are designed and evaluated in a parametric fashion. Three types of beam to column connection conditions are incorporated in evaluation process. Frames, designed acco...
Evaluation of minimum shear reinforcement requirements for higher strength concrete
Ozcebe, G; Ersoy, U; Tankut, T (1999-05-01)
This paper presents an evaluation on the minimum shear reinforcement requirements given in the ACI, Canadian, and Turkish codes for high-strength concrete. Thirteen beams having the minimum shear reinforcement required by ACI 318-83, the Turkish Code, and the equations proposed in this paper were tested Concrete strength varied between so and 80 MPa (8700 and 11,600 psi). For high-strength concrete (f(a)' > 69 MPa), the minimum shear reinforcement requirements of the Turkish Code and ACI 318-95 are not very...
Evaluation of scouring reliability at bridge abutments
Yanmaz, Ali Melih (2012-04-26)
Serious scouring may take place around bridge abutments during floods, which can lead to considerable damage or structural collapse. Design of abutment footings must, therefore, rely on the estimation of maximum possible depth of scour through the bridge opening. Deterministic scour-prediction equations are based on simplified assumptions and they do not account for randomness of the scouring variables, which leads to an unavoidable risk in footing design. This study is concerned with the development of a n...
Evaluation of fluctuating pressures measured with connection tubes
Aydın, İsmail (1998-01-01)
The dynamic characteristics of fluctuating pressure measuring systems composed of connection tubing and pressure transducers were analyzed. A method of correction for the effects of resonance and viscous damping on the measured pressure fluctuations was proposed. A mathematical model of the measuring system was formed combining the governing equations of the unsteady flow in the rigid connection tubing and the corresponding volumetric deformation in the transducer. Numerical solution of the governing equati...
Citation Formats
B. T. Bircan, “Evaluation of pile bearing capacity and settlement by load tests,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr