Experimental Space Radiation Measurements, Radiation Effects and Irradiation Tests

Date

2017-04-08

Author

Demirköz, Melahat Bilge

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://hdl.handle.net/11511/71723

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental Thermal Performance Characterization of Flat Grooved Heat Pipes Alijani, Hossein; ÇETİN, BARBAROS; Akkus, Yigit; Dursunkaya, Zafer (Informa UK Limited, 2019-06-15) The thermal characterization of aluminum flat grooved heat pipes is performed experimentally for different groove dimensions. Three heat pipes with groove widths of 0.2 mm, 0.4 mm, and 1.5 mm are used in the experiments. The effect of the amount of the working fluid is extensively studied for each groove width. The results reveal that, although all three succeed in dissipating the heat input through the phase change of the working fluid by continuous evaporation and condensation, the effectiveness of the he...
Experimental thermal performance characterization of flat grooved heat pipes Alijani, Hossein; Çetin, Barbaros; Akkuş, Yiğit; Dursunkaya, Zafer (TAYLOR & FRANCIS INC, 530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA, 2015-06-15) The thermal characterization of aluminum flat grooved heat pipes is performed experimentally for different groove dimensions. Three heat pipes with groove widths of 0.2 mm, 0.4 mm, and 1.5 mm are used in the experiments. The effect of the amount of the working fluid is extensively studied for each groove width. The results reveal that, although all three succeed in dissipating the heat input through the phase change of the working fluid by continuous evaporation and condensation, the effectiveness of the he...
EXPERIMENTAL INVESTIGATION AND PERFORMANCE ANALYSIS OF GASKETED-PLATE HEAT EXCHANGERS Akturk, Fatih; Sezer Uzol, Nilay; Aradag, Selin; Kakac, Sadik (2015-01-01) In this study, the thermal and hydrodynamic performance analyses of sa elected gasketed-plate heat exchanger with different number of plates are performed experimentally. A gasketed-plate heat exchanger (GPHE) test set-up is designed and constructed to perform experimental measurements for thermal and hydrodynamic performance analyses of plate heat exchangers. The experiments are performed for an industrial chevron-type plate heat exchanger under different flow conditions for a wide range of Reynolds number...
EXPERIMENTAL ANALYSIS AND TRANSIENT SIMULATION OF HEAT TRANSFER INSIDE THE FINNED TUBE ADSORBENT BED OF A THERMAL WAVE CYCLE ÇAĞLAR, AHMET; Yamali, Cemil (Begell House, 2019-01-01) Heat transfer enhancement inside the adsorbent bed of a thermal wave adsorption cooling cycle is investigated both experimentally and theoretically. Various adsorbent materials are tested using a finned tube adsorbent bed for the thermal wave cycle. The mathematical model is well defined, including a 2-D coupled heat and mass transfer analysis. This study presents the effects of heat transfer fluid velocity, regeneration temperature, condenser pressure, and particle diameter on the heat transfer enhancement...
Experimental analysis on the measurement of ballistic properties of solid propellants Cuerdaneli, S.; Ak, M. A.; Ulaş, Abdullah (2007-06-16) Ballistic properties of solid propellants play an important role in the performance of the solid propellant rocket motors. Therefore, ballistic properties of a likely propellant should be known and provided to the design engineers. In this study, a specific AP/HTPB composite solid propellant (SCP) was examined to obtain steady-state linear burning rates as a function of pressure and propellant initial temperature, temperature sensitivity, and pressure deflagration limit (PDL). In some tests micro-thermocoup...

Citation Formats

M. B. Demirköz, “Experimental Space Radiation Measurements, Radiation Effects and Irradiation Tests,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/71723.