Effect of Influent Strength on Ni II treatıng Actıvated Sludge

1994-07-30

Suggestions

Effect of guluronic acid contetnt on turbidity removal potential of bacterial alginate
Moral, Çiğdem; Sanin, Faika Dilek (null; 2016-10-02)
Effect of biogenic substrate concentration on 4-chlorophenol degradation kinetics in sequencing batch reactors with instantaneous feed
ŞAHİNKAYA, Erkan; Dilek, Filiz Bengü (Elsevier BV, 2006-09-01)
Two sequencing batch reactors (SBRs) instantaneously fed with 200mg/l 4-chlorophenol (4-CP) were operated at different feed peptone concentrations to investigate the effect of biogenic substrate (peptone) concentrations on reactor performance, yield coefficient (Y) and 4-CP degradation kinetics. One of the reactors was operated at 10 days of sludge retention time (SRT) and the other was operated at 20 days of SRT. High chemical oxygen demand (COD) removal efficiencies (90-95%) and complete 4-CP removals (de...
Effect of TiH2 particle size on foaming of aluminium
Kubilay, Ceylan; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2005)
A study is carried out on the production of aluminum foams via powder processing. The study deals mainly with the effect of TiH2 particle size on the process of foaming. Mainly two TiH2 particle sizes were used; namely 27,5 ?m and 8,5 ?m. Foaming experiments were carried out at temperatures between 675oC ا 840oC. The viscosity of the system is adjusted by controlled addition of Al2O3. The study shows that choice of foaming agent size is influential in the foaming process. With the use of fine foaming agent,...
Effect of Surfactant Type on Antimicrobial Activity of Capsaicin Loaded Nanoemulsions
Akbaş, Elif; Söyler, Ulviye Betül; Öztop, Halil Mecit (null; 2016-07-08)
Effect of retrogression and reaging heat treatment on corrosion fatigue crack growth behavior of AA7050 alloy
Akgün, Nevzat; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2004)
The effect of retrogression and reaging heat treatment on corrosion fatigue crack growth behavior on AA7050 T73651 aluminum alloy is investigated. CT (Compact Tension) specimens are prepared in LS direction for fatigue crack growth tests . Samples are solution heat treated at 477 °C and aged at 120 °C for 24 h (T6 condition). After that, samples are retrogressed at 200 °C for times of 1, 5, 30, 55 and 80 minutes in a circulating oil bath. Then, samples are re-aged at 120 °C for 24 h (T6 condition). Hardness...
Citation Formats
F. B. Dilek, “Effect of Influent Strength on Ni II treatıng Actıvated Sludge,” 1994, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72142.