The Combined Effects of Characteristic Dissolution of Vanadium and Atomic Order on Antiphase Boundary Energies in Equiatomic FeCo Alloys

Date

2010-11-29

Author

Aykol, Muratahan
Mehrabov, Amdulla
Akdeniz, Mahmut Vedat

Metadata

Show full item record

Item Usage Stats

42
views

0
downloads

URI

https://hdl.handle.net/11511/72189

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

The effect of magnisium to sulfur ratio on the graphite morphology of graphite cast iron produced at differrent section thicknesses ELMABROUK, Omar; ERFAN, Osama M.; Kalkanlı, Ali (2011-09-18) This paper is concerned with the investigation of the effect of magnesium to sulfur ratio on the graphite morphology and estimation of the ranges of this ratio use to produce graphite cast iron at different section sections. The main factors affecting shape of graphite cast iron are the metallurgical structures and the section thicknesses. Cast iron of different shapes of graphite particles directly affect its thermo-mechanical properties. The nodular shape of these graphite particles such as in ductile cas...
The effect of SN content and isothermal transformation temperature on the mechanical properties of austempered ductile cast iron Özcan, Alper; Atala, Haluk; Department of Metallurgical and Materials Engineering (2003) In this study the effects of Sn content and isothermal transformation temperature on the ultimate tensile strength (UTS), elongation and hardness of austempered ductile cast iron (ADI) was investigated. To determine the possible effect of Sn on these properties the Sn content of standard GGG30, GGG40 and GGG50 materials were taken as reference, whose chemical compositions vary from 0,016 to 0,050% in terms of Sn. However the Sn content was increased to a maximum of 0,26% for investigating the effect of Sn o...
THE EFFECT OF A 3RD COMPONENT IMPURITY-C ON THE HEAT-CAPACITY OF A3B-TYPE ORDERED ALLOYS Mehrabov, Amdulla; MATYSINA, ZA (Wiley, 1989-12-01) For the first time theoretical (in terms of the classical theory of ordering) and experimental (with the adiabatic calorimeter method) investigations are made of the effect of a third component impurity C on the heat capacity of A3B‐type ordered alloys with FCC structure. The effect of the impurities Mn, Cr, Mo, or W on the heat capacity of Ni3Fe alloys is analysed as an example. The comparison of the theoretical results with the experimental data shows good qualitative agreement.
The effects of tine coupling and geometrical imperfections on the response of DETF resonators Azgın, Kıvanç (IOP Publishing, 2013-12-01) This paper presents a two-degree-of-freedom analytical model for the electromechanical response of double ended tuning fork (DETF) force sensors. The model describes the mechanical interaction between the tines and allows investigation of the effect of a number of asymmetries, in tine stiffness, mass, electromechanical parameters and load sharing between the tines. These asymmetries are introduced during fabrication (e. g., as a result of undercut) and are impossible to completely eliminate in a practical d...
The effect of the triphenylamine unit on electrochemical behaviors of benzotriazole bearing conjugated polymers Özdemir Hacıoğlu, Şerife; Toksabay, Sinem; Şendur, Merve; Toppare, Levent Kamil (null; 2016-07-17)

Citation Formats

M. Aykol, A. Mehrabov, and M. V. Akdeniz, “The Combined Effects of Characteristic Dissolution of Vanadium and Atomic Order on Antiphase Boundary Energies in Equiatomic FeCo Alloys,” 2010, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72189.