Sönümlü Yapıların Dinamik Özelliklerinin Titreşim Ölçümlerinden Bulunması Üzerine Bir Yöntem

Date

1984-10-01

Author

Yaman, Yavuz
Özgüven, Hasan Nevzat

Metadata

Show full item record

Item Usage Stats

63
views

0
downloads

URI

https://hdl.handle.net/11511/72212

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Radiation characteristic analysis of tapered slot antennas Cihangir, Aykut; Alatan, Lale; Aydın Çivi, Hatice Özlem; Department of Electrical and Electronics Engineering (2010) The aim of this study is to investigate the effects of changes in the physical parameters of tapered slot antennas (TSA) on their radiation characteristics and also to explore the possibility of reconfiguration in the radiation pattern of TSA by switching between two different types of tapering. There are mainly three physical parameters that affect the radiation pattern of TSAs. These are antenna length, aperture width and the ground extension. After designing a wideband microstrip line to slot line transi...
Factored reinforcement learning using extended sequence trees Şahin, Coşkun; Polat, Faruk; Department of Computer Engineering (2015) Reinforcement Learning (RL) is an area concerned with learning how to act in an environment to reach a final state while gaining maximum amount of reward. Markov Decision Process (MDP) is the formal framework to define an RL task. In addition to different techniques proposed to solve MDPs, there are several studies to improve RL algorithms. Because these methods are often inadequate for real-world problems. Classical approaches require enumeration of all possible states to find a solution. But when states a...
Tümleşik Kaplama Yöntemiyle Zirkonyum Bazlı Metalik Cam Kaplamaların Geliştirilmesi Özerinç, Sezer(2019-11-15) Metalik camlar, geleneksel alasımların aksine bir kristal yapısına sahip olmayan malzemelerdir. Metalik camlar birçok farklı metalin bir araya gelmesiyle elde edilebildiginden, binlerce farklı alasım alternatifi bulunmaktadır. Metalik camların sundugu bu genis alasım tasarımı alanı, yüksek sertlikte, paslanmaya dirençli ve biyouyumluluk gösteren yeni malzemelerin tasarlanmasına olanak saglamaktadır. Zirkonyum-bazlı metalik camlar ve tantal içeren alasımlar üzerinde yapılan çalısmalar, bu malzemelerin ...
A New finite transmission zero generation technique in evanescent mode waveguide combline filters Elif, İnan; Yıldırım, Nevzat; Erdem, Oğuzhan; Department of Electrical and Electronics Engineering (2014) With the recent development of the RF and microwave technology, sizes of the microwave filters become more of an issue. In this thesis, evanescent mode waveguide combline bandpass filters operating at 16.6D17 GHz frequency band suitable for miniaturized RF & microwave modules have been developed. In order to accomplish compact filter sizes, evanescent mode waveguide (EWG) and combline filter designs are incorporated. By using a filter design software Filpro and 3DD electromagnetic (EM) simulation software (...
A comperative assessment of available methods for seismic performance evaluation of buried structures Özcebe, Ali Güney; Çetin, Kemal Önder; Department of Civil Engineering (2009) In the last three decades, seismic performance assessment of buried structures has evolved through the following stages : i) buried structures are not prone to seismically-induced damages, thus no need for detailed investigations, ii) eliminating soil-structure-earthquake interaction and use of seismically-induced free field ground deformations directly as the basis for seismic demand, thus producing conservative results, and finally iii) soil-structure and earthquake interaction models incorporating both k...

Citation Formats

Y. Yaman and H. N. Özgüven, “Sönümlü Yapıların Dinamik Özelliklerinin Titreşim Ölçümlerinden Bulunması Üzerine Bir Yöntem,” 1984, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72212.