Influence of the Heat Treatment on the Material Properties of Self-Aligned Planar Cu-Ag-In-Sn Nanowires

2017-10-15
Güllü, Hasan Hüseyin
Bayraklı, Özge
Yıldız, Dilber Esra
Parlak, Mehmet

Suggestions

Influence of solution properties and pH on the fabrication of electrospun lentil flour/HPMC blend nanofibers
Tam, Nilay; Oğuz, Seren; Aydogdu, AYÇA; Şümnü, Servet Gülüm; Şahin, Serpil (Elsevier BV, 2017-12-01)
Electrospinning is a method used in fiber production in which an electric force is applied to create jets of charged polymer solutions. The objective of this study was to obtain homogeneous nanofibers from lentil flour and hydroxypropyl methylcellulose (HPMC) blend by using electrospinning method. Distilled water was used as solvent. The effects of pH (7, 10 and 12), lentil flour concentration (1% and 2% (w/v)) and HPMC concentration (0.25%, 0.5% and 1% (w/v)) on solution properties and fiber morphology wer...
Influence of surface treatment of fillers on the mechanical properties of thermoplastic polyurethane composites
Tayfun, Ümit; Bayramlı, Erdal; Yılmazer, Ülkü; Department of Polymer Science and Technology (2015)
The incompatibility between filler and polymer matrix is the major restriction for the production of composites to have desirable properties. Several surface modification methods are applied to filler surface in order to improve the interfacial adhesion with polymer matrix. Easy processablity and fully recyclability character of thermoplastic polyurethane (TPU) make it cost effective for many applications. Majority of TPU application is across a range of markets including automotive, sporting goods, medical...
Influence of spectral particle properties on radiative heat transfer in optically thin and thick media of fluidized bed combustors
Ates, Cihan; Sen, Ozge; Selçuk, Nevin; Külah, Görkem (2017-12-01)
In this study, influence of spectral particle properties on radiative heat transfer in the freeboard/dilute zone of fluidized bed combustors (FBCs) is investigated. The aim is to identify how important it is to involve spectral particle properties and to determine the predictive accuracy of gray Mie and gray Geometric Optics (GOA) approximations in optically thin and thick media by benchmarking their predictions against spectral solutions. For that purpose, input data required for modelling radiative heat t...
Influence of Phase Magnetic Couplings on Phase Current Characteristics of Multiphase BLDC Machines with Overlapping Phase Windings
Bostancı, Emine; Plikat, Robert (2015-09-01)
Multiphase brushless dc (BLDC) machines are implemented in electric and hybrid electric vehicle applications due to their high torque/power density, good fault tolerance capability, and low torque ripple. Moreover, the per-phase converter rating can be reduced by increasing the phase number. However, the number of magnetic couplings between phases increases with the phase number, and these magnetic couplings can have an important influence on the machine performance. Therefore, they need to be considered in...
Influence of the nitrogen flow rate on the order and structure of PECVD boron nitride thin films
Anutgan, M.; Anutgan, T. Aliyeva; Ozkol, E.; Atilgan, I.; Katircioglu, B. (2009-09-01)
Three sets of boron nitride (BN) thin films are deposited with different N(2)/B(2)H(6) flow ratios (r = 4, 10 and 25) by plasma enhanced chemical vapor deposition (PECVD). The variations of physical properties in different deposition sets are analyzed by optical (XPS, FTIR, UV-visible spectroscopies), mechanical and electrical measurements. The films are considered to be deposited in a turbostratic phase (t-BN). Evolution of bonding configurations with increasing r is discussed. Relatively higher nitrogen f...
Citation Formats
H. H. Güllü, Ö. Bayraklı, D. E. Yıldız, and M. Parlak, “Influence of the Heat Treatment on the Material Properties of Self-Aligned Planar Cu-Ag-In-Sn Nanowires,” presented at the International Conference on Condensed Matter and Materials Science, (11 - 15 Ekim 2017), Adana, Türkiye, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72395.