A two-step procedure for seismic assessment of mid-rise reinforced cocnrete buildings

Date

2019-10-11

Author

Uğur, Akpınar
Binici, Barış
Yakut, Ahmet
Tuncay, Kağan
Cenikli, Serdar

Metadata

Show full item record

Item Usage Stats

91
views

0
downloads

URI

https://hdl.handle.net/11511/72408

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

A Sensitivity study for probabilictic seismic hazard assessment of Sinop nuclear power plant site Yılar, Erkan; Gülerce, Zeynep; Kaymakcı, Nuretdin; Department of Earthquake Studies (2014) Based on the studies conducted for more than 40 years, Sinop is chosen as one of the three most convenient places in Turkey to construct a Nuclear Power Plant (NPP). The objective of this study is to evaluate the sensitivity of the design ground motions for Sinop NPP Site to the seismic source characterization and ground motion prediction models within the probabilistic seismic hazard assessment (PSHA) framework. This study introduces significant improvements over the previous seismic hazard studies conduct...
A Reliability Model for Bridge Abutment Scour Yanmaz, Ali Melih (2004-01-01) Deterministic scour prediction equations for bridge abutments consider only the effects of hydraulic parameters and do not take the uncertainties of scouring parameters into account. Treatment of these uncertainties would provide the means for risk evaluation in bridge foundation design. Herein, a static reliability model is developed for the assessment of local scouring reliability around bridge abutments having relatively short lengths. This model is based on resistance-loading interference incorporating ...
A Stray Magnetic Flux-Based Robust Diagnosis Method for Detection and Location of Interturn Short Circuit Fault in PMSM Gurusamy, Vigneshwaran; Bostancı, Emine; Li, Chen; Qi, Yuan; Akin, Bilal (Institute of Electrical and Electronics Engineers (IEEE), 2021-01-01) © 1963-2012 IEEE.Early diagnosis of interturn short circuit (ITSC) fault is essential to prevent catastrophic electrical machine failures. Along with the detection, locating the faulty winding at its incipient stage is also critical to reduce the outage duration and operation losses. This article proposes a practical method to detect the ITSC fault and locate the faulty winding in permanent magnet synchronous motors (PMSMs) through stray magnetic flux monitoring. It is shown that relying on the fundamental ...
A Geomechanical Wellbore Stability Assessment for Different Formations in Petroleum Fields Kök, Mustafa Verşan (2014-01-01) Wellbore stability problems make up huge over-costs worldwide. In recent years declining resource volumes and favorable oil prices are encouraging operators to drill deeper, and more complex well trajectories drilling for hydrocarbons have turned into a much more challenging task. Furthermore, the complexity and variations of those wells have added the weight to planning and problem anticipation at both drilling and production stages. This study describes the geomechanical wellbore stability analysis of dif...
A detailed seismic performance assessment procedure for RC frame buildings Yakut, Ahmet (2005-06-01) A detailed seismic performance assessment procedure has been developed for RC frames with masonry in-fill walls. The procedure is based on member damage functions developed for the primary components: columns, beams and in-fill walls. Investigations carried out to determine the influence of a number of parameters on the damageability of components were combined with experimental data to develop component damage functions expressed in terms of member deformations. The component damage states are combined tak...

Citation Formats

A. Uğur, B. Binici, A. Yakut, K. Tuncay, and S. Cenikli, “A two-step procedure for seismic assessment of mid-rise reinforced cocnrete buildings,” 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72408.