Jeotermal enerjili ve güneş enerjili sera ısıtma sistemlerinin karşılaştırılması: Ege Bölgesi için kritik bir gözden geçirme

2013-09-12

Suggestions

Application of non-market economic valuation method to value the environmental benefits of geothermal energy in monetary terms
Horasanlı, Erol; Alp, Emre; Department of Environmental Engineering (2010)
Determining environmental economic benefits of geothermal energy is difficult since there is no market for all environmental goods and services related to it. In order to determine and measure the market price of non-market goods and services, non-market valuation methods are used. Since intangible benefits do not have monetary values, non-market valuation techniques are applied to estimate them. Non-market valuation methods are important tools for policy makers in the cost and benefit analysis and environm...
Comprehensive approach to torque and lost circulation problems in geothermal wells in terms of drilling fluid
Sönmez, Ahmet; Kök, Mustafa Verşan; Department of Petroleum and Natural Gas Engineering (2020-7)
Drilling in a lost circulation zone has long been a challenge in geothermal wells due to its strong potential for high torque and wellbore instability. Excessive torque and friction values cause overpull, pipe stuck and severe problems ending up with losing the well in some cases. High temperature-high pressure (HTHP) drilling fluids design; which minimize loss rates and friction values, is critical for the success of these challenging drilling practices. Known fact is that, oil/synthetic based drilling flu...
Uncertainty quantification by using stochastic approach in pore volume calculation for geothermal reservoir
Gürel, Emrah; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2015)
This study will present the application of a stochastic approach and experimental design techniques to a geologic system in order to quantify the uncertainty of pore volume estimations for a liquid dominated high temperature geothermal reservoir. The pore volume is a key element when defining the total resource available in the field. Alasehir geothermal reservoir pore volume uncertainty has been assessed. The uncertainties being addressed include geometry (top of reservoir and base of reservoir), reservoir...
Jeotermal Kuyu Sondajlarında Kaçak ve Buru Problemlerinin Sondaj Sıvısı Yönünden İncelenmesi
Bağatır, Gökhan; Kök, Mustafa Verşan; Gücüyener, Hakkı İsmail(2018)
Jeotermal kuyu sondajlarında yaşanan olası bir çamur kaçağının neden olduğu kuyustabilitesi problemleri sonucunda oluşan yüksek buru değerleri, sondaj dizisinin ağırlıkalmasına, takım sıkışmalarına ve bazı durumlarda ise kuyunun terk edilmesine varansorunlara yol açmaktadır. Bu sorunları en aza indirmek için çamur kaçağını kapatmayayönelik çamur kompozisyonları ile etkin kayganlaştırma performansı, yüksek sıcaklık veyüksek basınç dayanımı olan sondaj sıvısı kompozisyonları kullanılmalıdır. Bilinen en yüksek...
Estimation of the formation temperature from the inlet and outlet mud temperatures while drilling geothermal formations
Tekin, Sema; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2010)
Formation temperature is an important parameter in geothermal drilling since it affects all the components of the system such as drilling fluid, drilling operations and equipment through mud temperatures. The main objective of this study is to estimate the formation temperatures of five geothermal wells in Germencik-Ömerbeyli geothermal field by using inlet and outlet mud temperatures obtained during drilling. For this purpose, GTEMP, a wellbore thermal simulation model is used to simulate the process of dr...
Citation Formats
Ö. Bayer, “Jeotermal enerjili ve güneş enerjili sera ısıtma sistemlerinin karşılaştırılması: Ege Bölgesi için kritik bir gözden geçirme,” 2013, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72412.