a correlation study among in situ CBR, laboratory CBR and DCP test results for plant-mixed crushed limestone.

Date

1989

Author

Kadıoğlu, Müge

Metadata

Show full item record

Item Usage Stats

70
views

0
downloads

URI

https://hdl.handle.net/11511/7251

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A correlation study between Hveem and marshall stabilities of the bituminous mixtures. Akdeniz, Ahmet; Department of Civil Engineering (1967)
A study of site dependent response spectra based on accelerograms recorded in Turkey. Altinyollar, Ayhan; Department of Civil Engineering (1992)
A Pilot Study of Joint Stability at the Zirconium or Titanium Abutment/Titanium Implant Interface Cavusoglu, Yeliz; AKÇA, KIVANÇ; Gürbüz, Rıza; ÇEHRELİ, MURAT CAVİT (2014-03-01) Purpose: To compare the interfaces of loaded and unloaded zirconium and titanium abutments with titanium implants using scanning electron microscopy (SEM). Materials and Methods: Zirconium and titanium abutments (n = 5 per group; four test and one control) were torque-tightened into titanium implants secured into metal blocks, and computer-aided design/computer-assisted manufacture-based zirconium oxide copings were fabricated and cemented to the abutments with temporary resin-based cement. Specimens of eac...
A periodic DFT study of water and ammonia adsorption on anatase TiO2 (001) slab Erdogan, Rezan; Ozbek, Olus; Önal, Işık (2010-06-15) Water and ammonia adsorption mechanisms on anatase TiO2 (001) slab surface are investigated by means of periodic DFT approach. Molecular and dissociative adsorption energies for water are calculated to be -15 kcal/mol and -32 kcal/mol, respectively. Similarly, molecular and dissociative adsorption energies of ammonia on the same surface are found as 25 kcal/mol and 20 kcal/mol. A reverse result in this order is reached for the previous case of ONIOM cluster study (23 kcal/mol and 37 kcal/mol, respectively)....
A parametric study on processing of scratch resistant hybrid sol-gel silica coatings on polycarbonate Yavas, Hakan; Selcuk, C. Duygu Ozturk; Ozhan, A. E. Sinan; Durucan, Caner (2014-04-01) Scratch resistant silica-based hybrid coatings on polycarbonate substrates were formed by dip-coating of acid-catalyzed tetramethyl ortohosilicate (TMOS): diethylenetriamine (DETA): H2O:2-propanol sols. The sol formulation and dip-coating process parameters on microstructural and performance properties-here optical transmittance and scratch resistance-of the coatings were evaluated. The effect of water quantity, total aqueous component (H2O + 2-propanol) amount and relative proportion of TMOS: DETA on film ...

Citation Formats

M. Kadıoğlu, “a correlation study among in situ CBR, laboratory CBR and DCP test results for plant-mixed crushed limestone.,” Middle East Technical University, 1989.