Multi-layered Conductive Films via Recursive Transfer-Print of Graphene onto Polymeric Foil

2018-06-29
Inkaya, Uğur
Çelik, Kübra
Oral, Ahmet

Suggestions

Multichromic and soluble conjugated polymers containing thiazolothiazole unit for electrochromic applications
Akpinar, Hava Zekiye; Udum, Yasemin Arslan; Toppare, Levent Kamil (2015-02-01)
Here we report the preparation of two solution processible polymers; poly(2-(5-(2-(2-octyldodecyl)-2H-benzo[d][1,2,3]triazol-4-yl)thiophen-2-yl)-5-(thiophen-2-yl)thiazolo[5,4-d]thiazole) (PBTTz) and poly(2-(5-(9,9-dioctyl-9H-fluoren-2-yl)thiophen-2-yl)-5-(thiophen-2-yl)thiazolo[5,4-d]thiazole) (PFTTz) which are multichromic electroactive polymers. PBTTz was synthesized via Stille coupling polymerization whereas PFTTz was synthesized via Suzuki coupling polymerization. Both polymers were coated on ITO slides...
Multi-colored electrochromic polymer with enhanced optical contrast
Tarkuc, Simge; Unver, Elif Kose; Udum, Yasemin Arslan; Toppare, Levent Kamil (Elsevier BV, 2010-11-01)
A new it-conjugated monomer was synthesized which contains an electron-donating unit 3 4-ethylenedioxythiophene and electron withdrawing quinoxaline-based heterocycle to examine the effects of imine unit on the optoelectronic and redox properties of the resulting polymer Electroactivity of monomer and electrochemical redox behavior of its polymer were investigated by cyclic voltammetry An irreversible anodic wave at +0 85 V vs Ag wire reference electrode corresponding to the monomer oxidation was observed S...
Multi-frequency contactless electrical impedance imaging using realistic head models : single coil simulations
Gürsoy, Doğa; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2007)
Contactless electrical impedance imaging technique is based upon the measurement of secondary electromagnetic fields caused by induced currents inside the body. In this study, a circular single-coil is used as a transmitter and a receiver. The purpose of this study is twofold: (1) to solve the induced current density distribution inside the realistic head model resulting from a sinusoidal excitation, (2) to calculate the impedance change of the same coil from the induced current distribution inside the head...
Multi-color electrochromic polymers on reflective devices
Reynolds, JR; Argun, AA; Çırpan, Ali; Aubert, PH (2004-03-28)
Multi-Period Reactive Power Optimization for Determination of Switch Statuses of Shunt Elements and Voltage Setpoints of Power Plants
Elma, Ismail; Güven, Ali Nezih (2021-01-01)
© 2021 Chamber of Turkish Electrical Engineers.Transmission system operators (TSOs) need to control voltages along the grid to have an economic and reliable system operation. Due to fixed and operational costs of switching equipment of shunt elements, TSOs are expected to minimize the number of switching operations of these devices. The purpose of this study is to optimize reactive power flows so as to have minimum transmission losses and number of switching operations of controllable shunt elements within ...
Citation Formats
U. Inkaya, K. Çelik, and A. Oral, “Multi-layered Conductive Films via Recursive Transfer-Print of Graphene onto Polymeric Foil,” presented at the Graphene Conference (2018), Dresden, Germany, 2018, Accessed: 00, 2021. [Online]. Available: http://phantomsfoundation.com/GRAPHENECONF/2018/Abstracts/Grapheneconf2018_Oral_Ahmet_222.pdf.