High voltage direct current transmission.

Date

1983

Author

Büyükbaş, Haluk

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/7311

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

High mobility, low voltage operating C-60 based n-type organic field effect transistors Schwabegger, G.; Ullah, Mujeeb; Irimia-Vladu, M.; Baumgartner, M.; Kanbur, Y.; Ahmed, R.; Stadler, P.; Bauer, S.; Sariciftci, N. S.; Sitter, H. (Elsevier BV, 2011-10-01) We report on C-60 based organic field effect transistors (OFETs) that are well optimized for low voltage operation. By replacing commonly used dielectric layers by thin parylene films or by utilizing different organic materials like divinyltetramethyldisiloxane-bis(benzocyclo-butene)(BCB), low density polyethylene (PE) or adenine in combination with aluminum oxide (AlOx) to form a bilayer gate dielectric, it was possible to significantly increase the capacitance per unit area (up to two orders of magnitude)...
High speed phase-locked loop for mobile communications. Aslan, Mehmet; Ünver, Zafer; Department of Electrical and Electronics Engineering (1996)
High-accuracy optical power measurements by using electrical-substitution cryogenic radiometer Bazkir, O; Ugur, S; Samedov, F; Esendemir, A (SPIE-Intl Soc Optical Eng, 2005-01-01) An optical power scale is established at Ulusal Metroloji Enstitusu (UME) using the helium-cooled primary-level electrical-substitution cryogenic radiometer. The scale is established at discrete laser wavelengths of vertically polarized tuneable Ar+, fixed He-Ne, and Nd:YAG (with second harmonic) laser sources. To increase measurement accuracy, laser intensities are stabilized to better than 0.009% using an electro-optical modulator. The spatial profiles of polarized laser beams are cleaned with a spatial f...
High Bandwidth Current Control via Nonlinear Compensation and GaN-based VSI Yuruk, Huseyin; Keysan, Ozan; Ulutas, Bans (2019-01-01) Nonlinearities in the voltage source inverter (VSI) such as dead time, switching time, delay time, voltage drops on the power switches, parasitic capacitances etc. are considered to be the main sources of the output voltage distortions. These distortions result in low order harmonics in the output current, which in turn increase core losses and create torque ripples. In particular, in the low speed and low torque applications the control performance and the stability of the system degrades substantially. Al...
Constant beamwidth ridged horn antenna design and implementation Altungüneş, İnanç; Hızal, Altunkan; Department of Electrical and Electronics Engineering (2003)

Citation Formats

H. Büyükbaş, “High voltage direct current transmission.,” Middle East Technical University, 1983.