Aluminum Induced Texturing of Glasses Combined with Macro scale Texture and Their Effect on Efficiency of a Si H

Date

2016-09-22

Author

Ünal, Mustafa
Demircioğlu, Zeynep
Dönerçark, Ergi
Özkol, Engin
Turan, Raşit

Metadata

Show full item record

Item Usage Stats

78
views

0
downloads

URI

https://hdl.handle.net/11511/73116

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Aluminum Induced Nanotexturing of Glass Superstrate for Enhanced Photo-Response of a-Si:H Thin Film Ünal, Mustafa (null; 2014-06-17) Texturing the glass surface has the potential to significantly improve the performance of thin film solar cells. In this work, we investigate the effect aluminum induced texturing at nanoscale (AIT) on the optical, topographical, and morphological properties of Sodalime glass superstrate. As revealed by scanning electron microscope (SEM) and atomic force microscope (AFM), a laterally uniform surface morphology of the AIT texture was obtained. Our experimental results show that the surface roughness and thus...
Aluminum induced texturing of sandy and prism glasses: Combination of micro/nano texture with macro texture Ünal, Mustafa; Donerscark, Ergi; Ozkol, Engin; Turan, Raşit (2017-08-01) Aluminum induced texturing (AIT) is one of the most promising texturing methods, which can be applied on glass substrates for solar cell applications. Combination of different dimensional structures exhibits the opportunity to achieve enhanced light trapping schemes. Here in this study, float glass and macro textured sandy and prism glasses went through Aluminum induced texturing (AIT) process in order to enhance light management. Surface morphologies were investigated by FE-SEM and optical measurements in ...
Aluminum Induced Glass Texturing (AIT) on Soda-Lime, Borosilicate, Alkali-Free and Silica Glass For Thin Film Solar Cell Applications Ünal, Mustafa; Günöven, Mete; Tankut, Aydın; Sökmen, İlkay; Turan, Raşit (2015-12-10) Texturing of glass substrate is an alternative novel method for light trapping, which to enhance the absorbed light by way of increasing the diffused transmittance (haze) so that the amount of absorbed light will be increased instead of texturing transparent conductive oxide (TCO). In this study, aluminum induced texturing (AIT) technique is used to texture different type of glasses to see the effect of the chemical composition on surface morphology and optical properties. Improvement in haze values as well...
Silver containing sol-gel derived silica thin films: effect of aluminum incorporation on optical, microstructural and bactericidal properties Akgun, Betul Akkopru; Mellott, Nathan P.; Durucan, Caner (2012-05-01) Silver containing silica (Ag-SiO2) thin films with and without aluminum (Al) were prepared on soda-lime-silica glass by spin coating of aqueous sols. The coating sol was formed through mixing tetraethyl orthosilicate [Si(OC2H5)(4)]/ethanol solution with aqueous silver nitrate (AgNO3) and aluminum nitrate nonahydrate [(AlNO3)(3)center dot 9H(2)O] solutions. The deposited films were calcined in air at 100, 300 and 500 A degrees C for 2 h and characterized using x-ray diffraction, UV-visible and x-ray photoele...
Aluminum Doped Zinc Oxide by Atomic Layer Deposition for Device Applications Çakmak, Hüseyin; Yılmaz, Doğan; Öztürk, Mustafa; İmer, Muhsine Bilge; Özbay, Ekmel (2019-09-06)

Citation Formats

M. Ünal, Z. Demircioğlu, E. Dönerçark, E. Özkol, and R. Turan, “Aluminum Induced Texturing of Glasses Combined with Macro scale Texture and Their Effect on Efficiency of a Si H,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/73116.