Development of membranes and investigating their potential in Turkish Chemical Industry

2018-09-02

Suggestions

Development of new lead-free solders for electronics industry
Kantarcıoğlu, Anıl; Kalay, Yunus Eren; Department of Metallurgical and Materials Engineering (2012)
Joining of electronic components onto the circuit boards is done by soldering operation, during production of all electronic devices. In many countries, including Turkey, traditionally used tin-lead (Sn-Pb) solder alloys have been restricted to be used in consumer electronics appliances because of the toxic effects of lead (Pb) within these alloys. Tin-silver-copper (Sn-Ag-Cu) based alloys have been developed as the most promising candidate that can replace the Sn-Pb alloys. However, various problems have e...
Development and characterization of new layered cathode materials for Li ion batteries
Pişkin, Berke; Aydınol, Mehmet Kadri (2015-09-07)
Development of Practical Extraction and Analysis Methods for Nonylphenol Compounds in Water and Wastewater
Sanin, Faika Dilek; Ömeroğlu, Seçil (2014-09-21)
Development and characterization of new layered cathode materials for lithium ion batteries
Pişkin, Berke; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2018)
In the present study, the effects of Ni:Mn:Co mole ratio and doping elements, i.e. Mo, W, Ag and Cu, in Li(NixMnyCo1−x−y-zMz)O2 (NMC) were systematically investigated as cathode materials for Li-ion batteries. Li(Ni1/3Mn1/3Co1/3)O2 (NMC-111), Li(Ni0.2Mn0.2Co0.6)O2 (NMC-226), Li(Ni0.6Mn0.2Co0.2)O2 (NMC-622), Li(Ni0.2Mn0.6Co0.2)O2 (NMC-262) and their doped compositions were synthesized via spray pyrolysis. Spray pyrolysis method was used to attain a spherical fine-sized morphology in the powders synthesized. ...
Development of sol-gel derived hydroxyapatite-titania coatings
Ün, Nusret Serhat; Durucan, Caner; Department of Metallurgical and Materials Engineering (2008)
A processing route for development of hydroxyapatite (Ca10(PO4)6(OH)2 or HAp)-titania (TiO2) hybrid coatings on titanium alloy (Ti6Al4V) has been established. HAp powders of different size and morphology were synthesized by aqueous precipitation techniques using different precursor couples and XRD, SEM and FTIR were performed for complete characterization. Hybrid coatings were then prepared via sol-gel by incorporating presynthesized HAp powders into a titanium-alkoxide dip coating solution. Titania network...
Citation Formats
H. Kalıpçılar, “Development of membranes and investigating their potential in Turkish Chemical Industry,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/73584.