A New Method Of Curve Fitting For Calculating Reverberation Time From Impulse Responses With Insufficient Length

Date

2012-08-22

Author

Sorguç, Arzu

Metadata

Show full item record

Item Usage Stats

56
views

0
downloads

URI

https://hdl.handle.net/11511/74219

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

A new method of curve fiting for calculation of reverberation time from impulse responses with insufficient length Özgenel, Çağlar Fırat; Sorguç, Arzu (2012-12-01) Most of the room acoustics evaluation parameters are calculated from the energy decay curve obtained from the room impulse response. Schroeder's backwards integration method is one of the most commonly used methods to obtain room impulse response. Although, the method holds its validity since 1964 and used extensively, obtaining room impulse response with sufficient length to observe total energy decay requires high computational cost especially in highly reverberant rooms. In such cases, present acoustical...
A new method of curve fiting for calculation of reverberation time from impulse responses with insufficient length Özgenel, Çağlar Firat; Sorguç, Arzu (2012-12-01) Most of the room acoustics evaluation parameters are calculated from the energy decay curve obtained from the room impulse response. Schroeder's backwards integration method is one of the most commonly used methods to obtain room impulse response. Although, the method holds its validity since 1964 and used extensively, obtaining room impulse response with sufficient length to observe total energy decay requires high computational cost especially in highly reverberant rooms. In such cases, present acoustical...
A new method for signal interpolation Tuncer, Temel Engin (2006-04-19) Interpolation is an important problem of signal processing. Even though there are several methods for interpolation, it is still an open problem. In this paper, we propose a new method for interpolation with certain advantages compared to the previous methods. The proposed method is based on the least squares error optimum design of the interpolating filter. Interpolating filter is chosen as the Kaiser filter since it can be configured in a variety of shapes by the appropriate choice of cut-off and shape pa...
A new formulation for the analysis of elastic layers bonded to rigid surfaces Pinarbasi, Seval; Akyüz, Uğurhan; Mengi, Yalcin (Elsevier BV, 2006-07-01) Elastic layers bonded to rigid surfaces have widely been used in many engineering applications. It is commonly accepted that while the bonded surfaces slightly influence the shear behavior of the layer, they can cause drastic changes on its compressive and bending behavior. Most of the earlier studies on this subject have been based on assumed displacement fields with assumed stress distributions, which usually lead to "average" solutions. These assumptions have somehow hindered the comprehensive study of s...
A New Method for Leakage Inductance Calculation of Transverse Flux Machines Zafarani, Mohsen; Moallem, Mehdi; Ghadamyari, Mohammad Adib (2011-09-10) This paper presents a new analytical method for leakage inductance calculation of transverse flux permanent magnet machines. In this method, leakage flux paths are predicted base on the finite element results, and then all paths would be modeled by flux tubes. Finally, the inductance of the machine would be obtained by calculation of the permeance of flux tubes. The validity of the proposed model is verified by comparing the Finite Element results with the results obtained from the proposed approach. Compar...

Citation Formats

A. Sorguç, “A New Method Of Curve Fitting For Calculating Reverberation Time From Impulse Responses With Insufficient Length,” 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74219.