Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Design and construction of a sampling system that can collect PM10 PM2 5 and PM1 samples simultaneously from atmosphere
Date
2016-09-03
Author
Ateş, Ömer
Balcılar, İlker
Tuncel, Süleyman Gürdal
Metadata
Show full item record
Item Usage Stats
31
views
0
downloads
Cite This
URI
https://hdl.handle.net/11511/74259
Collections
Unverified, Conference / Seminar
Suggestions
OpenMETU
Core
Design and construction of a sampling system that can collect PM10, PM2.5 and PM1 samples simultaneously from atmosphere
Ateş, Ömer; Tuncel, Süleyman Gürdal; Department of Environmental Engineering (2019)
In this study, a particulate matter (PM) sampling system that can collect PM10 (particulate matter with diameter of less than 10 μm), PM2.5 and PM1 samples simultaneously with a single pump on separate filters was constructed and validated. The sampler consisted of a F&J Specialty DF-1E carbon vane vacuum pump, with a flowrate of 115 L/min, and 3 channels connected to the pump through a manifold. Each channel had a cyclone, a filter holder of 47 mm diameter, a micro-orifice (critical orifice) for velocity c...
Design and construction of a robotic manipulator with six revolute joints
Başçuhadar, İlhan; Özgören, M.Kemal; Department of Mechanical Engineering (1989)
Design and realization of a microcontroller controlled line overcurrent production relay
Öztürk, Engin; Özay, Nevzat; Department of Electrical and Electronics Engineering (1998)
Design and Fabrication of a Novel Wideband DNG Metamaterial with the Absorber Application in Microwave X-Band
Mahmood, Ahmed; Yetkin Öğücü, Gölge; Sabah, Cumali (Hindawi Limited, 2017)
A novel metamaterial, which exhibits a wideband double negative behavior in X-band, is proposed, designed, and investigated in this paper. The metamaterial is composed of modified S-shaped split-ring resonators (S-SRR). The periodic structure is designed and simulated using CST MWs. Next, the experiments are carried out, and it is shown that the simulation and the experimental results agree well and the designed structure has a wide bandwidth in X-band. An absorber application of this metamaterial is also p...
Design and Implementation of a 800W Step Down Converter with Optimized F-L-N Parameters
Şahin, İlker; Hava, Ahmet Masum (2014-06-04)
With the increasing pressure on modern power converters towards higher efficiency and smaller volume, power electronic specialists are now even more obliged to power converter optimization. In this study, the optimal design of an 800W, hard switched step down converter is targeted. Switching frequency (f) and inductance (L) are selected as parameters for optimization. Interleaving, a technique widely utilized due to the benefits it introduces to the converter that it is applied to, is also taken into consid...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
Ö. Ateş, İ. Balcılar, and S. G. Tuncel, “Design and construction of a sampling system that can collect PM10 PM2 5 and PM1 samples simultaneously from atmosphere,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74259.