Design And device Applıcatıon of Si based Cu Ag Ga Te thin film Heterostructure

Date

2016-09-23

Author

Güllü, Hasan Hüseyin
Coşkun, Emre
Bayraklı, Özge
Parlak, Mehmet

Metadata

Show full item record

Item Usage Stats

38
views

0
downloads

URI

https://hdl.handle.net/11511/74380

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Design and digital implementation of thyristor controlled reactor control Genç, Murat; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2007) In this research work, the control system of 16 MVAr, 13.8 kV TCR will be designed and digitally implemented. A Real-Time Control System (NI CompactRIOTM Reconfigurable I/O) and a Digital Platform (NI LabVIEWTM Gcode) are used in the digital implementation of TCR control system. The digital control system is composed of reactive power calculation, firing angle determination and triggering pulse generation blocks. The performance of control system will be tested in the field. The simulation results will also...
Design and prototyping of second generation METU MEMS electromagnetic micro-power generators Turkyilmaz, Serol; Külah, Haluk; Muhtaroglu, Ali (2010-12-01) This paper presents an electromagnetic (EM) vibration to electrical power generator which can effectively harvest energy from low frequency external vibrations. The reported second generation MEMS energy scavenger module up-converts low frequency environmental vibrations before mechanical-to-electrical conversion. Power is generated through planar electromagnetic induction using a magnet on the low frequency actuation plane, and coils on the high frequency resonance plane. The proposed approach has been dem...
Design and realization a quasi yagi antenna array and its feed system printed on a ceramic substrate for x-band radar applications Atabay, Berkay; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2019) This thesis includes design, simulation, realization and measurement of a four-element quasi- Yagi antenna array printed on a ceramic substrate for X-band radar applications. The microstrip array antenna is designed using four quasi-Yagi antennas in a linear configuration and is printed on Alumina 99.6% substrate made by Coorstek Corporation. The antenna can fit into small areas because of compact structure due to the use of high dielectric constant substrates. In addition, the use of alumina ceramic substr...
Design and implementation of front-end electronics for an infrared imagingh system Yeler, Abdülkadir; Beşikci, Cengiz; Department of Electrical and Electronics Engineering (2001)
Design and realization of a step motor driver with micro-stepping capability Ateş, Emel Hizal; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (2011) Step motors are motion control mechanisms that convert digital pulses into mechanical shaft rotation. They provide high precision positioning and repeatability of movement without a closed loop control, which is preferable for industrial applications in which accurate positioning control is needed. In this thesis, design and realization of a step motor driver will be performed using micro-stepping, which is based on controlling the current of each winding of the motor continuously and solves noise and reson...

Citation Formats

H. H. Güllü, E. Coşkun, Ö. Bayraklı, and M. Parlak, “Design And device Applıcatıon of Si based Cu Ag Ga Te thin film Heterostructure,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74380.