Characterization of Silver Nanowire Modifi ed TextileHeaters

Date

2016-12-01

Author

Doğanay, Doğa
Polat Genlik, Sevim
Ünalan, Hüsnü Emrah

Metadata

Show full item record

Item Usage Stats

85
views

0
downloads

URI

http://www1.metalurji.org.tr/immc2016/IMMC2016_Bildiriler.pdf
https://hdl.handle.net/11511/74574

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Characterization of cross-coupling in capacitive micromachined ultrasonic transducers Bayram, Barış; Yaralioglu, GG; Oralkan, O; Lin, DS; Zhuang, XF; Ergun, AS; Sarioglu, AF; Wong, SH; Khuri-Yakub, BT (2005-01-01) This paper analyzes element-to-element and cell-to-cell cross-coupling in capacitive micromachined ultrasonic transducers (cMUTs) using an interferometer. In a 1-D linear cMUT array immersed in oil, a single element was excited, and membrane displacements were measured at different positions along the array with an interferometer. Electrical measurements of the received voltage on each array element were also performed simultaneously to verify the optical measurements. The array was then covered with a poly...
Characterization of novel materials for fused filament fabrication AL-DUAIS, ABDULLAH ABDULRAHMAN NAJI; Özerinç, Sezer; Kazanç Özerinç, Feyza; Department of Mechanical Engineering (2021-6-24) Fused filament fabrication (FFF) is a polymer additive manufacturing technology that is suitable for a wide range of applications due to its low cost and ease of use. This thesis investigated two types of novel materials for FFF use. First, a foaming PLA filament is considered and the mechanical properties of 3D printed specimens using this filament is characterized. The results show that the strength, modulus and density of the foaming PLA can be tuned over a wide range of values by varying FFF process par...
Characterization of cds thin films and schottky barrier diodes Korkmaz, Sibel; Erçelebi, Ayşe Çiğdem; Department of Physics (2005) CdS thin films were deposited by thermal evaporation method onto glass substrates without any doping. As a result of the structural and electrical investigation it was found that CdS thin films were of the polycrystalline structure and n-type; and of the transmission analysis optical band gap was found to be around 2.4 eV. Temperature dependent conductivity measurements were carried out in the range of 180 K ا 400 K. The dominant conduction mechanism is identified as tunnelling between 180 K ا 230 K and the...
Characterization of Duplex Stainless Steel Weld Metals Obtained by Hybrid Plasma-Gas Metal Arc Welding Yurtışık, Koray; Tirkeş, Süha; Gür, Cemil Hakan; Gürbüz, Rıza (FapUNIFESP (SciELO), 2013-07-01) Despite its high efficiency, autogenous keyhole welding is not well-accepted for duplex stainless steels because it causes excessive ferrite in as-welded duplex microstructure, which leads to a degradation in toughness and corrosion properties of the material. Combining the deep penetration characteristics of plasma arc welding in keyhole mode and metal deposition capability of gas metal arc welding, hybrid plasma - gas metal arc welding process has considered for providing a proper duplex microstructure wi...
Characterization of GZO thin films fabricated by RF magnetron sputtering method and electrical properties of In/GZO/Si/Al diode Surucu, O. Bayrakli (Springer Science and Business Media LLC, 2019-11-01) The main focus of this work is the structural and optical characterization of Ga-doped ZnO (GZO) thin film and determination of the device behavior of In/GZO/Si/Al diode. GZO thin films were deposited by RF magnetron sputtering technique from single target. The structural and morphological properties of GZO film were investigated by X-ray diffraction (XRD), Raman scattering, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy analysis (EDS) measurements. Optical properties of the fil...

Citation Formats

D. Doğanay, S. Polat Genlik, and H. E. Ünalan, “Characterization of Silver Nanowire Modifi ed TextileHeaters,” 2016, Accessed: 00, 2021. [Online]. Available: http://www1.metalurji.org.tr/immc2016/IMMC2016_Bildiriler.pdf.