Evaluation of moisture induced damage to the asphalt concrete mixtures

Download
015547.pdf
1991
Aydoğmuş, Altan
Show full item record
55
views
0
downloads
Construction industry, Civil engineering
https://hdl.handle.net/11511/7482
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Development of a knowledge-based risk mapping tool for International Construction Projects
Yıldız, Açelya Ecem; Dikmen Toker, İrem; Birgönül, Mustafa Talat; Department of Civil Engineering (2012)
Due to its high-risk nature, international construction projects are more vulnerable to adverse changes in project environment and company objectives. To achieve successful project outcomes, early provision of risks has a vital place in managing construction projects. Within the literature, several risk assessment methodologies have been offered to simulate probable consequences of risks. The majority of the proposed methodologies are limited in reflection of real project conditions as they require probabil...
Evaluation of low-temperature test methods for elastomeric bridge bearings
Yakut, Ahmet (American Society of Civil Engineers (ASCE), 2002-01-01)
Examination of filler wall frame inter-action under lateral load by an analytic model.
Eroğlu, Şerif Gökalp; Department of Civil Engineering (1976)
Optimal wind bracing systems for multi-storey steel buildings
Yıldırım, İlyas; Hasançebi, Oğuzhan; Department of Civil Engineering (2009)
The major concern in the design of the multi-storey buildings is the structure to have enough lateral stability to resist wind forces. There are different ways to limit the lateral drift. First method is to use unbraced frame with moment-resisting connections. Second one is to use braced frames with moment-resisting connections. Third one is to use pin-jointed connections instead of moment-resisting one and using bracings. Finally braced frame with both moment-resisting and pin-jointed connections is a solu...
Evaluation of Top Flange Bracing Systems for Curved Box Girders
Topkaya, Cem; Williamson, Eric B. (American Society of Civil Engineers (ASCE), 2005-11-01)
In recent years, steel trapezoidal box girders for curved highway interchanges have become popular. For these bridge systems, significant steel girder cross-sectional stresses occur during the concrete casting sequence. To help resist construction loads, a lateral truss system is installed at a level close to the top flanges to form a "pseudo-closed" section, which has a higher torsional stiffness than an open U-section. Several recent incidents, ranging from the buckling of individual bracing members to th...
Citation Formats
A. Aydoğmuş, “Evaluation of moisture induced damage to the asphalt concrete mixtures ,” M.S. - Master of Science, Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr