Implementation of mep self-compiler

1976
Sarikaya, Behcet
Show full item record
83
views
0
downloads
https://hdl.handle.net/11511/7494
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Implementation of the extended complex values for uncertain data
Soysal, Alper; Yazıcı, Adanan; Department of Computer Engineering (1998)
IMPLEMENTATION OF GAIN CONTROL AS IP CORE
Karabalkan, Melike Atay; Ermis, Ercan; Oner, Mehmet (2016-05-19)
Stable output level increases the accuracy of further signal processing algorithms. So, gain control algorithms are important preprocessing steps. On the other hand, implementation of gain control algorithms vary depending on environment and performance parameters. In this case, the algorithms are required re-implementation. Re-implementation is a time consuming process especially for embedded signal processing platforms like FPGA. Implementation of signal processing algorithms as IP Cores are recommended t...
Implementation and assessment of Hellsten explicit algebraic Reynolds stress k-omega model
İlhan, Umut; Aksel, Mehmet Haluk; Baran, Özgür Uğraş; Department of Mechanical Engineering (2022-9)
Turbulence modeling is one of the most challenging aspects of Computational Fluid Dynamics (CFD). The choice of turbulence model affects the accuracy and computational cost of the CFD analyses. Linear Eddy Viscosity Models (LEVMs) are commonly used in industrial CFD applications due to their low computational cost and ease of convergence. However, they often fail to model complex flow structures. More advanced models, such as Reynolds Stress Transport Models (RSTMs), have better performance for capturing th...
Implementation of the minimum relative (cross) entropy method for the solution of inverse ECG problem Minimum göreceli (çapraz) entropi (MGE) metodunun ters ekg probleminin çözümünde uygulanmasi
Bircan, Ali; Serinağaoğlu Doğrusöz, Yeşim (2010-07-15)
Minimum relative (cross) entropy method can be used to solve linear inverse electrocardiography (ECG) problem. Inverse ECG problem has a form d=Gm where m is a vector of unknown model parameters (epicardial potentials), d is a vector of measurements (torso potentials) and G is the forward transfer matrix. MRE method treats the elements of m as random variables and obtains the potential distribution and the solution as the expected value of the posterior distribution. The prior information about lower and up...
Implementation and comparison of different constitutive models in deep drawing process
Çoğun, Ferah; Darendeliler, Haluk; Department of Mechanical Engineering (2013)
The aim of the study is to find out the effects of different models namely; BBC2008-8p, Yld2003-8p, Hu2003, isotropic hardening, kinematic hardening, combined hardening and Hill’48 on simulation of cylindrical, square and round bottom cup drawing processes. For this purpose two different sheet materials, SS304 stainless steel and DKP6112 steel with 1 mm thickness and three different punch travels were used in both computer simulation and experimental phase of this study. BBC2008-8p, Yld2003-8p and Hu2003 mo...
Citation Formats
B. Sarikaya, “Implementation of mep self-compiler,” Middle East Technical University, 1976.
METU IIS - Integrated Information Service open@metu.edu.tr