Pole placement and stabilizaiton of large scale systems using diagonal feedback compensators.

Date

1985

Author

Gücļü, Aydın Nusret

Metadata

Show full item record

Item Usage Stats

84
views

0
downloads

URI

https://hdl.handle.net/11511/7501

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Pole estimation for arbitrarily-shaped dielectric targets using genetic algorithm-based resonance annihilation technique Sayan, Gönül; Kuzuoğlu, Mustafa (Institution of Engineering and Technology (IET), 2001-03-15) The use of a genetic algorithm-based resonance annihilation technique to extract the interior poles of an arbitrarily shaped dielectric object with the ultimate purpose of target identification is proposed. The technique is demonstrated for a dielectric sphere with a very good agreement between the exact and extracted pole values.
Line Current Analysis for Bearing fault Detection In Induction Motors Using Hilbert Transform Phase Oumaamar, M. E. K.; Razik, H.; Rezzoug, A.; Khezzar, A. (2011-09-10) The present paper focuses by means of an experimental study, on the effect of a bearing fault on the stator current signatures in induction motors. The variation in the amplitude of the characteristic components is not so significant. For that and in order to depict the presence of the fault harmonic signatures, the authors used the phase analysis of Hilbert transform applied on the spectrum modulus of the line current.
Rotor Loss Prediction in Air-Cored Permanent Magnet Machines Echenique, Estanislao J. P.; Keysan, Ozan; Mueller, Markus A. (2013-01-01) Despite the cost raise of rare earth materials, low and medium speed permanent magnet (PM) machines have gained big popularity among wind turbine manufacturers due to their high efficiency and reliability. Ironless stator machines have been proposed in the literature due to their reduced manufacturing cost. However, in the modelling process of the air-cored machines, the rotor loss calculation is generally neglected. Through Finite Element Analysis (FEA) and experimental testing it has been found that roto...
Line-of-sight stabilization of a gimbaled mechanism under passive base isolation Kandemir, Kutlu Demir; Akmese, Alper; Yazıcıoğlu, Yiğit (2014-01-01) Line-of-sight stabilization is an important concept for aerospace applications utilizing gimbaled imaging systems. A widely used method for protecting the line-of-sight stabilization system from the disturbing effects of the base vibrations is to mount it on passive vibration isolators. However, these isolators may interact with gimbal controller and drastically limit the stabilization performance. This work deals with line-of-sight stabilization problem in aerospace structures by focusing on the parameters...
Stick model development of aircraft structures for dynamic analysis Hayirli, Ugur; Kayran, Altan (2017-01-01) © 2017, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.Finite element methods have been widely used in the analysis of aircraft structures. The models usually consist of large system matrices for the solution of the dynamic response of the aircraft structure. Model reduction techniques are used to condense the finite element models by retaining the dynamic characteristics of the global model. This study presents two different methodologies namely the reduction of system ma...

Citation Formats

A. N. Gücļü, “Pole placement and stabilizaiton of large scale systems using diagonal feedback compensators.,” Middle East Technical University, 1985.