Nature of MoOx/n-cSi Heterojunction Solar Cell

Date

2017-10-22

Author

Nasser, Hisham
Turan, Raşit

Metadata

Show full item record

Item Usage Stats

84
views

0
downloads

URI

https://hdl.handle.net/11511/75155

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Properties of reactive O-2 ion beam sputtered TiO2 on Si wafers Ulucan, S; Aygun, G; Ozyuzer, L; Egilmez, M; Turan, Raşit (2005-02-01) Tio(2) thin films were deposited on silicon (100) p-type wafers, using the reactive ion beam sputtering method in high vacuum as an alternative to conventional Argon ion beam sputtering in an O-2 environment. Oxygen ions with 1000 eV energy were formed in a thruster and bombarded a high purity Ti target. The molecules of Tio(2) were deposited on a Si (100) wafer at various substrate temperatures. The structural and optical properties were analyzed using Fourier Transform Infrared Spectroscopy in the range o...
Properties of Al2O3: nc-Si nanostructures formed by implantation of silicon ions into sapphire and amorphous films of aluminum oxide Tetelbaum, D. I.; Mikhaylov, A. N.; Belov, A. I.; Ershov, A. V.; Pitirimova, E. A.; Plankina, S. M.; Smirnov, V. N.; Kovalev, A. I.; Turan, Raşit; Yerci, Selçuk; Finstad, T. G.; FOSS, SEAN (2009-02-01) Photoluminescence, infrared Fourier spectroscopy, Raman scattering, transmission electron microscopy, and electron diffraction were used to study the luminescent, optical, and structural properties of aluminum oxide layers (sapphire and films of Al2O3 deposited on silicon) implanted with Si+ to produce silicon nanocrystals. It is established that, in both cases, a high-temperature annealing of heavily implanted samples brings about the formation of silicon nanocrystals. However, the luminescent properties o...
Properties and Phase Segregation of Crosslinked PCL-Based Polyurethanes Guney, Aysun; Hasırcı, Nesrin (2014-01-05) Polyurethane (PU) films were prepared from different types of poly(e-caprolactone) glycols and hexamethylene diisocyanate without using any other ingredients such as solvent, catalyst, or chain extender. Polymers were stabilized by crosslinking formed as allophanate and/or biuret linkages during the curing process. The effects of different components on the product properties such as chemical structure, microphase segregation, mechanical strength, thermo-mechanical, thermal properties, and surface hydrophil...
Properties of YBCO superconductors prepared by ammonium nitrate melt and solid-state reaction methods Sozeri, Huseyin; Ozkan, Husnu; Ghazanfari, Nader (Elsevier BV, 2007-01-31) Ceramic YBCO superconductors were prepared by: (1) ammonium nitrate melt, (2) solid-state reaction methods and the properties of the samples obtained were compared. Under the same annealing conditions single phase YBCO was synthesized at a lower temperature by the former method. Moreover, at 900 degrees C Y-123 phase and the initially adjusted Y-211 additive could be formed using ammonium nitrate melt, but not with the solid-state method which leads Y-123 at a higher temperature (950 degrees C) without Y-21...
Properties of gelatine wound dressings Kızıltay, Aysel; Ulubayram, Kezban; Hasırcı, Nesrin (null; 2001-09-08)

Citation Formats

H. Nasser and R. Turan, “Nature of MoOx/n-cSi Heterojunction Solar Cell,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75155.