Thermal Analysis of Solar Energy Assisted Cement Production

2016-11-17
Tarı, İlker
Show full item record
32
views
0
downloads
https://hdl.handle.net/11511/75494
Unverified, Conference / Seminar

Suggestions

THERMAL ANALYSIS OF CO-FIRING OF OIL SHALE AND BIOMASS FUELS
Ozgur, Emre; Miller, Sharon Falcone; Miller, Bruce G.; Kök, Mustafa Verşan (2012-01-01)
The effect of co-firing of biomass fuels with oil shale on combustion was investigated Thermogravimetric analysis and differential scanning calorimetry were the tools used to perform the investigation. Since the combustion of biomass is highly exothermic, biomass fuels can serve as an appropriate fuel feedstock. Biomass fuels producing much volatile matter and containing less cellulose are good candidates for co-firing with oil shale. The biomass samples used in the study were hazelnut shell, wheat bran, po...
Thermal analysis of eutectic modified and grain refined aluminum-silicon alloys
İslamoğlu, H. Erol; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2005)
A series of AlSi9Mg alloys were prepared and tested to reveal the effect of addition sequence and timing of grain refiner and eutectic modifier. AlSr10 master alloy was used as an modification reagent, and also for grain refiner AlTi5B master alloy was used. The depression at the eutectic temperature due to the addition of modifier and decrease in the amount of undercooling at the liquidus due to the presence of grain refiner were examined by the cooling curves which were obtained by the Alu-Therm instrumen...
Thermal analysis and Combustion Calorimetry of Wood Lignin and its Pyrolysis Products
Kök, Mustafa Verşan; Mikhail, Varfolomeev; Antony, Grachev; Antony, Gerasimov (null; 2015-08-28)
Thermal analysis of gray cast iron by interpretation of cooling curves
Çetin, Arda; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2002)
The aim of the present work is to investigate the relations between data obtained from the cooling curve and its first and second derivatives and the as-cast microstructure of gray cast iron, assuming that the cooling curve reflects the complete history of the solidification process. Fourteen different alloy compositions are prepared in order to obtain statistical predictive models to relate cooling curve parameters with the solidification variables such as chemical analysis, inoculation, graphite shape, pr...
Thermal characterization of different origin class-G cements
Kök, Mustafa Verşan (2014-02-01)
In this study, thermal characteristics and kinetics of three different origin class-G cements (Mix, Bolu, and Nuh) were studied using thermogravimetry (TG/DTG) and differential scanning calorimeter (DSC). In DSC curves at different heating rates a number of peaks were observed consistently in different temperature intervals. TG/DTG is used to identify the detected phases and the corresponding mass loss. In the dehydration kinetic study of the different origin class-G cement samples, three different methods ...
Citation Formats
İ. Tarı, “Thermal Analysis of Solar Energy Assisted Cement Production,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75494.
METU IIS - Integrated Information Service open@metu.edu.tr