Variation of thermal conductance of composite structures by inclination.

1969
Sertçelik, Yalçın
Show full item record
91
views
0
downloads
https://hdl.handle.net/11511/7553
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Variation of hardness and modulus across the thickness of Zr-Cu-Al metallic glass ribbons
Melgarejo, Z. Humberto; Jakes, J.E.; Hwang, J.; Kalay, Yunus Eren; Kramer, M.J.; Voyles, P.M.; Stone, D.S. (2013-01-01)
We investigate through-thickness hardness and modulus of Zr50Cu45Al5 metallic glass melt-spun ribbon. Because of their thinness, the ribbons are challenging to measure, so we employ a novel nanoindentation based-method to remove artifacts caused by ribbon flexing and edge effects. Hardness and modulus vary approximately linearly across the thickness but, unlike bulk ingots, the side of the ribbon that cooled most quickly had the highest hardness and modulus. This “inverse” variation may be caused by the fas...
Variation of the Young's modulus and the internal friction coefficient of beta brass with temperature.
Aşkın, Cahit; Department of Metallurgical Engineering (1968)
Variation of back-calculated breakage rate parameters in Bond-mill grinding
Hoşten, Çetin; Avsar, C (Wiley, 2004-10-01)
The variation of breakage rates with grinding environment is important in the analysis and simulation of various grinding processes. In particular, computer simulation of the labor-intensive experimental Bond grindability test requires reliable estimates of breakage rate and distribution parameters from a minimum amount of experimental work. This paper was aimed at studying the variation of breakage rate parameters in the Bond mill. Batch kinetic experiments with monosize feeds and standard locked-cycle Bon...
Variation of the elastic constants of tourmaline with chemical composition
Tatli, Ali; Galioğlu Özkan, Yeliz (Springer Science and Business Media LLC, 1987-2)
Elastic wave velocities and lattice parameters of five tourmaline specimens with different chemical compositions have been measured. The piezoelectric effects on the elastic constants have been found to be small and can be neglected. Variations of the elastic wave velocities and elastic constants of the different tourmaline specimens indicate that: (i) partial substitution of Al by Fe in the structure decreases the shear wave velocities, (ii) replacement of Na by Ca increases the resistance of the structure...
Variation of the molar volume with the temperature and the Pippard relations near the melting point in benzene
Tari, O.; Yurtseven, Hasan Hamit (2016-08-01)
In this study, we calculate variation of the molar volume with the temperature at constant pressures (70.5, 85.2, 128 and 175.2 MPa) using the experimental data from the literature for the solid and liquid phases of benzene near the melting point. The calculated molar volume decreases in the solid phase as the temperature increases toward the melting temperature, whereas in the liquid phase just above the melting temperature it increases abruptly, as expected. By calculating the specific heat, thermal expan...
Citation Formats
Y. Sertçelik, “Variation of thermal conductance of composite structures by inclination.,” Middle East Technical University, 1969.
METU IIS - Integrated Information Service open@metu.edu.tr