Investigation into the application degree of the viscous flow air meter in air cooling flow rate measyrement of multi-cylinder air cooled engine model where small pressure drop is required.

1975
Ergani, Ahmet Cem
Show full item record
89
views
0
downloads
https://hdl.handle.net/11511/7563
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Investigation of the effect of outdoor temperature data on the building heating energy requirement and validity of the TS 825 degree-day region clustering
Altun, Murat; Akçamete Güngör, Aslı; Akgül, Çağla (2020-01-01)
The outdoor temperature is one of the most important parameters affecting the calculation of energy requirements of buildings. Determination of the thermal insulation details and heating energy requirement of the buildings in Turkey, where energy consumption is dominated by space heating, is made according to TS 825 "Thermal Insulation Rules in Buildings" standard. In TS 825, the provinces are clustered in degree-day regions (DDR) according to their climatic conditions. The main climatic parameter that sepa...
Investigation of digester f/m ratio as a parameter to affect sludge minimization and gas production of ultrasonically treated sludge
Köksoy, Gözde Tuğba; Sanin, Faika Dilek; Department of Environmental Engineering (2009)
Ultrasonic sludge disintegration –the most commonly used mechanical pretreatment method- enables the occurrence of cavitation bubbles to extract intracellular material from the cell into aqueous phase. However, there is a lack of information on the volatile solids loading on the anaerobic digestion process performance of ultrasonically treated sludge. In this thesis work, the effect of sonication on disintegration of waste activated sludge (WAS) and an important parameter digester F/M (food to microorganism...
Investigation of the Applicability of AASHTO LRFD Live Load Distribution equations for Integral Bridge Substructures
Erhan, Semih; Dicleli, Murat (SAGE Publications, 2009-08-01)
In this study, applicability of the AASHTO LRFD girder live load distribution equations (LLDEs) for integral bridge (IB) abutments and piles is investigated. For this Purpose, numerous 3-D and corresponding 2-D structural models of typical IBs are built and analyzed under AASHTO LRFD live load. In the analyses, the effect of various superstructure properties such as span length, slab thickness, girder spacing and stiffness are considered. The results from the 2-D and 3-D analyses are then used to calculate ...
Investigation of Mean Stress Effect for Equivalent Stress Methods and Critical Plane Approaches for High Cycle Fatigue Life Estimations
Engin, Zafer; Çöker, Demirkan (null; 2017-09-20)
Investigation of microstructure-ultrasonic velocity relationship in SiCp-reinforced aluminium metal matrix composites
Gür, Cemil Hakan (Elsevier BV, 2003-11-25)
Twenty-one sets of specimens were fabricated by hot pressing powder mixtures containing various volume and size combinations of pure Al and SiC particles. Neither heat treatment nor secondary deformation processes were applied. The microstructures of the specimens were characterised by optical and scanning electron microscopy. Using a 10 MHz probe, the velocity of ultrasonic longitudinal waves was measured. The results show that in general the ultrasonic velocity increases with an increase in SiC content. H...
Citation Formats
A. C. Ergani, “Investigation into the application degree of the viscous flow air meter in air cooling flow rate measyrement of multi-cylinder air cooled engine model where small pressure drop is required.,” Middle East Technical University, 1975.
METU IIS - Integrated Information Service open@metu.edu.tr