Inkjet-printed frequency-selective structures based on improved arrangements of u-shaped resonators

Date

2019-05-01

Author

Eris, Ozgur
İbili, Hande
Ergul, Özgür Salih

Metadata

Show full item record

Item Usage Stats

41
views

0
downloads

We present design, simulation, and fabrication of thin inkjet-printed frequency-selective structures involving U-shaped resonators. In order to obtain both multiband and polarization-independent operation, resonators are carefully arranged to construct thin structures. The designed arrangements are fabricated in a very low-cost inkjet-printing setup that is based on conventional printers loaded with silver-based inks. Initial results demonstrate favorable properties of the designs and their prototypes, demonstrating the feasibility of low-cost, but effective, frequency-selective structures.

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85074408942&origin=inward
https://hdl.handle.net/11511/76402
https://ieeexplore.ieee.org/abstract/document/8874729

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Inkjet-printed frequency-selective structures based on improvedarrangements of U-shaped resonators Erıs, Ozgur; İbili, Hande; Ergül, Özgür Salih (2019-10-17) We present design, simulation, and fabrication of thin inkjet-printed frequency-selective structures involving U-shaped resonators. In order to obtain both multiband and polarization-independent operation, resonators are carefully arranged to construct thin structures. The designed arrangements are fabricated in a very low-cost inkjet-printing setup that is based on conventional printers loaded with silver-based inks. Initial results demonstrate favorable properties of the designs and their prototypes, demo...
Improved Nano-optical Traps for Single-particle Sensing Applications Isiklar, G.; Algun, M.; Ergül, Özgür Salih (2019-01-01) We present numerical design and simulations of nano-optical traps for single-particle sensing applications. While commonly used nano-holes with circular shapes are suitable for physically trapping nanoparticles to be detected and identified, they generate relatively weak signals in the far zone, especially when nanoparticles are small. We show that optical sensitivity of nano-holes can be enhanced significantly by using well-designed tip geometries such that metallic and dielectric nanoparticles can be dete...
Multiband Microwave Metamaterials Based on Optimized Arrangements of Split-Ring Resonators Ibili, H.; Keles, S.; Ergül, Özgür Salih (2019-01-01) We present design and accurate simulations of multiband metamaterials that consist of three-dimensional arrangements of split-ring resonators (SRRs). In order to obtain multiband characteristics with resonances at multiple frequencies, SRRs with different sizes are arranged in well-designed grids. As opposed to unit cells with nested SRRs that are commonly used in the literature, using different-sized SRRs in array forms provide better flexibility in choosing resonance frequencies. On the other hand, strong...
LATTICE POLYMERS - BEHAVIOR FAR FROM THETA-CONDITIONS YURTSEVER, E; ISSEVER, S (Elsevier BV, 1992-01-01) Two-dimensional Monte-Carlo simulations of lattice polymers were carried out employing Lennard-Jones (LJ) type intramolecular interactions. The shape-dependent properties of these polymers were studied over a large range of interaction parameters and temperatures. The variation of the critical constant was also analysed. Two-dimensional surfaces of sections were used to determine the portions of the parameter space which corresponded to theta-conditions. The behaviour of LJ polymers far from theta-condition...
Magnetic properties of multiband U=infinity Hubbard model on anisotropic triangular and rectangular lattice strips CHERANOVSKII, VO; Esentürk, Okan; PAMUK, HO (1998-11-01) We study the dependence of the ground state spin of a multiband Hubbard model with infinite electron repulsion on anisotropic triangular and rectangular lattice strips on the model parameters. Considering the results of numerical calculations for the exact spectra of finite triangular lattice strips at different values of hopping integrals, we show the existence of a type of magnetic transitions with the jump of the ground state spin between minimal and maximal values. This transition is found only for spec...

Citation Formats

O. Eris, H. İbili, and Ö. S. Ergul, “Inkjet-printed frequency-selective structures based on improved arrangements of u-shaped resonators,” 2019, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85074408942&origin=inward.